- Products & Solutions
- / Distribution Amplifiers
- / Video Amplifiers
- / DA-DHROE6803+D
DA-DHROE6803+D
Fiber Receiver, Dual 1x4 or Single 1x8, Coaxial Out
The DA-DHROE6803+D dual-channel distribution amplifier (DA) with fiber input provides two channels of fiber HD/SD/ASI signal distribution with cable equalizing and reclocking and coaxial output. Designed for use with the 6800+™ modular core processing platform, this DA uses an SFP LC-type fiber dual receiver with built-in optical-to-electrical (O-to-E) conversion.
The DA-DHROE6803+D is configured to function as a dual-channel DA with four outputs for each input (two 1x4). It can also be configured to function as a single-channel 1x8 DA with built-in automatic changeover (ACO). All outputs are coaxial.
The DA-DHROE6803+D provides 20 channels of 1x4 or 10 channels of 1x8 HD/SD/ASI distribution in a 2RU 6800+™ frame with low power consumption and non-inverting ASI compatibility on all outputs. The DA-DHROE6803+D can protect your signal path with built-in ACO. The user can select which input is designated as primary and which is designated as secondary. This further leverages your investment and allows a backup to feed directly on this DA.
The DA-DHROE6803+D features broadcast-quality performance that exceeds SMPTE specifications. Software configuration of all parameters and remote indi-cation of signal presence and alarms are standard.
Features
- Dual-channel 1x4 or single-channel 1x8 HD/SD/ASI distribution using two fiber inputs and eight coaxial outputs
- Cost-effective DA with equalizing and reclocking
- Automatic cable equalization on inputs
- Automatic or forced rate detection
- Reclocking with automatic or forced bypass
- Identical polarity for ASI compatibility on all outputs
- Built-in ACO protection between inputs
- Feedback status reports input signals present and locked
- Card-edge control with LED feedback
- Remote control with status and alarm
- 20 channels of 1x4 or 10 channels of 1x8 distribution in a 2RU 6800+ frame
Input
- Two (1310 nm) SFP LC-type connector receiver — dual receive
Output
- Eight BNC coaxial outputs
Images/Diagrams
Block Diagram
Back Module
Specifications
Specifications and designs are subject to change without notice.
| Signal Type | HD, SD, ASI, SFP LC-type fiber interface |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >15 dB to 1485 MHz
>10 dB to 2.97 Gb/s |
| Cable Equalization | |
| 270 Mb/s | >984 ft (350 m) Belden 1694 or equivalent |
| 1.485 Gb/s | >492 ft (140 m) Belden 1694 or equivalent |
| Number of Outputs | 8 |
| Signal Type | HD, SDI, ASI |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >15 dB to 1485 MHz
>10 dB to 2.97 Gb/s |
| Signal Amplitude | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall Time | |
| 270 Mb/s | 400 to 700 ps (20 to 80% amplitude) |
| 1.485 Gb/s | <270 ps (20 to 80% amplitude) |
| Overshoot | <10% of amplitude |
| Jitter | <0.2 UI pk-pk |
| Power Consumption | <6.0 W |
| Propagation Delay | |
| DA-DHREO6803+D | ~4 ns (for reference only) |
| Temperature | |
| Operating Temperature | 32° to 122° F (0° to 50° C) |
| Performance Temperature | 50° to 104° F (10° to 40° C) |
| Start-Up Time | |
| DA-DHROE6803+D | Approximately 3 sec |
Ordering Information
| DA-DHROE6803+D | Dual 1x4 DA or single 1x8 with secondary backup input and built-in ACO, O-to-E, HD/SD/ASI with reclocking, 2 slots |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
