Customers: we're here for you
OP+HDX
Auto-Sensing 3G/HD/SD Demultiplexer with 8 AES Outputs with Optical Receiver
The HDX6803+D 3G/HD/SD de-embedder module for the 6800+™ frame has up to eight AES outputs and a video processing amplifier. It allows control over the video while functioning as a de-embedded audio processor for hot-switching de-embedded audio. This new module provides full audio delay, audio processing and the ability to de-embed metadata to external sources. The HDX6803+D is ideal for any broadcast operation where the de-embedding of audio from HD or SD video signals is required or where SD or HD video and (embedded and/or discrete) audio signals are processed.
The OP+HDX+R+D version includes a fiber sub-module that will allow the addition of an optical receiver to complement the electrical inputs.
Features
- Inputs:
- One video serial digital input
- DARS input (unbalanced, balanced compatible with external baluns)
- Fiber receiver (OP+HDX+R+D version)
- Outputs:
- Four serial video digital outputs
- Eight AES outputs (unbalanced, balanced compatible with external baluns)
Four AES standard — eight with HDX68OPT-AES8 license option - RS-232/422 serial port metadata output
- Operates video standards:
- 525 and 625 (SMPTE 259M)
- 1080i/p
- 720p (SMPTE 274M/296M)
- 3 Gb/s (SMPTE 424M) upgradeable
- Auto-detect or user-forced input video standard
- 10-bit video processing
- Digital equalization (supports Belden 8281/1694A and newer, thin coaxial cables like Alcatel SD02)
- Passes all HANC samples
- Passes VANC with user-selectable option for VBI/ANC line-by-line video deleting
- Up to eight frames of HD and 50 frames of SD video delay
- Loss of video modes:
- Pass
- Black
- Freeze
- Video processing amplifier with controls for:
- Luminance gain
- Luminance offset
- Chrominance gain
- Chrominance offset
- White clip
- Black clip
- Hue adjustment
- Ability to de-embed metadata
- Dolby® header adjustment
- Seamless Sound™ (on LOV audio de-embedding from black or grey can be obtained)
- Support for fiber receiver (OP+ HDX+R versions) option via sub module on main module
- Basic audio limiting capability:
- User-selectable threshold for soft compression limiting
- Adjustable compression slope
- Adjustable attack time/rate
- Adjustable delay time/rate
- Noise gate level and time
- Video and audio test generator
- AES audio routing/advanced processing
- Internal audio processing amplifier with gain, swap, invert, delay, mix (sum) of de-embedded audio channels
- Bypass able sample rate conversion for external and embedded Audio
- Data mode for passing compressed audio — apt-X®, Dolby®-E, AC-3
- 16-, 20- or 24-bit audio processing
- C, U and V bit transparency
- Shadowed/restored parameter settings when switching video standards
- Card-edge control
- Ethernet remote control and monitoring
- Auto-sensing 3G/HD/SD multiplexer with up to eight AES outputs
Product Details
Each HDX6803+D package includes a module-specific breakout cable that expands the number of available connections beyond what would fit on a standard two-slot back connector. The breakout cable includes an RS-232/422 serial connector to embed or de-embed Dolby® metadata.
The HDX6803+D can be controlled manually via card-edge controls with OSD video display or remotely using CCS Navigator™, HTTP Web server or third-party SNMP-based control applications. In addition, the module is Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in a FR6822+QXFE frame with a QSEE6800+HT or QSEE6800+HST module.
Images/Diagrams
Block Diagram
Back Module
Specifications
Specifications and designs are subject to change without notice.
| Serial Video Input | |
| Number | 1 |
| Standards | 1080p (SMPTE 424M) — 3 Gb/s HD |
| 1080i/p (SMPTE 274M); 720p (SMPTE 296M) — HD-SDI | |
| SMPTE 259M-C, 270 Mb/s, 525/625 component — SD-SDI | |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Frame Rate | 1080i/p: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are future software upgradeable) |
| 720p: 50, 59.94, 60 Hz | |
| Return Loss | >15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz |
| Equalization | 3 Gb/s-adaptive cable equalization for up to 164 ft (50 m) (typical) of Belden 1694A coaxial cable |
| HD-adaptive cable equalization for up to 492 ft (150 m) (typical) of Belden 1694A coaxial cable | |
| SD-adaptive cable equalization for up to 984 ft (300 m) (typical) of Belden 8281 coaxial cable | |
| Serial Video Output | |
| Number | 4 |
| Standards | 1080p (SMPTE 424M) — 3 Gb/s HD |
| 1080i/p (SMPTE 274M); 720p (SMPTE 296M) — HD-SDI | |
| SMPTE 259M-C, 270 Mb/s, 525/625 component — SD-SDI | |
| Frame Rate | 1080i: 25, 29.97, 30, 59.94 Hz |
| 1080p: 23.98 (p/psf), 24 (p/psf), 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are software upgradeable) | |
| 720p: 50, 59.94, 60 Hz 525, 625 | |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz |
| D.C. Offset | 0 V ±0.5 V |
| Signal Level | 800 mV 10% |
| Rise and Fall Time | <135 ps — 3 Gb/s |
| <270 ps — HD-SDI | |
| 0.4 to 1.5nS — SD-SDI | |
| Overshoot/Undershoot | <10% |
| Jitter | 3 Gb/s: <2 UI pk-pk of timing jitter (>10 Hz); <0.3 UI pk-pk of alignment jitter (>100 kHz) |
| HD: <1 UI pk-pk of timing jitter (>10 Hz); <0.2 UI pk-pk of alignment jitter for (>100kHz) | |
| SD: <0.2 UI pk-pk (>10 Hz); | |
| Delay | Up to 8 frames less 2 lines for 3G/HD; 50 frames for SD |
| Unbalanced AES/DARS Input | |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6.0 MHz |
| Sensitivity | <100 mV |
| Input Audio Rate | 32 to 108 kHz |
| Balanced AES/DARS Input (with external baluns) | |
| Connector | XLR with external baluns |
| Sensitivity | <200 mV |
| Impedance | 110 ohms +/-20% (0.1 to 6 MHz) |
| Maximum Input Signal | 10 V (pk-pk) |
| Common Mode Rejection | 0 to 7 V (0 to 20 kHz) |
| Input Audio Rate | 32 to 108 kHz |
| AES Unbalanced Output | |
| Standard | AES 3, SMPTE 276M |
| Type | Unbalanced, AC coupled |
| Connector | BNC (IEC 169-8) |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6 MHz |
| >= 30 dB, 0.1 to 6 MHz | |
| Signal Amplitude | 1 V pk-pk ±10% into 75 ohms load |
| Audio Rate | 48 kHz |
| Rise and Fall Time | 30 to 44 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| AES Balanced Output (with external baluns) | |
| Type | Balanced, transformer coupled |
| Connector | XLR with external baluns |
| Impedance | 110 ohms ±20% (0.1 to 6 MHz) |
| Signal Amplitude | 2 to 7 V pk-pk into 110 ohms load |
| Audio Rate | 48 kHz |
| Jitter | ±20 ns |
| Rise and Fall Time | 5 to 30 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| Fiber Optic Input (Receiver) | |
| Number of Inputs | 1 |
| Wavelength | 1260 to 1620 nm |
| Connector | SC/PC per IEC 61754-4-1 |
| Overload Input Power | 0 dBm PIN |
| Input Sensitivity | -20 dBm PIN |
| RS-232/422 (Metadata I/O) | |
| Standard | Electrical specification EIA-232C |
| Connector | DB-9 RS-232/422 switchable |
| Power and Temperature | |
| Power Consumption | 12 W maximum |
| Operating Temperature | 41° to 113° F (5° to 45° C) |
Ordering Information
| OP+HDX+R+D | Auto-sensing HD/SD demultiplexer with 4 AES outputs, 3 Gb/s-capable (with appropriate software key), includes dual-slot back module and breakout cable, Q-SEE-compliant with fiber optic PIN receiver |
| OP+HDX+R+HI+D | Auto-sensing HD/SD demultiplexer with 4 AES outputs, 3 Gb/s-capable (with appropriate software key), includes dual-slot back module and breakout cable, Q-SEE-compliant with fiber optic APD receiver (high-sensitivity) |
| HDX68OPT-AES8 | Optional software key upgrade for OP+HDX to provide 8 discrete AES outputs |
| HDX68OPT-3G | Optional software key upgrade for OP+HDX to provide 3 Gb/s HD capability |
| 6800+OPT+16CAPM | Breakout cable with coax connectors for unbalanced AES I/O (NOTE: One cable provided with each OP+HDX+R unit ordered) |
| NOTE: One unbalanced audio breakout cable (6800+OPT+16CAPM) is included with each OP+HDX module purchased and does not need to be separately ordered/purchased. Additional/replacement cables can be ordered using part numbers 6800+OPT+16CAPM. | |
| Compatible with the FR6822+QXFE frame | |
| Cable Options | |
| OP+CBL+1M-SCPC | Single-mode fiber cable, 1 meter, SC/PC male termination |
| OP+CBL+1M-STPC | Single-mode fiber cable, 1 meter, ST/PC male termination |
| OP+CBL+5M-SCPC | Single-mode fiber cable, 5 meter, SC/PC male termination |
| OP+CBL+5M-STPC | Single-mode fiber cable, 5 meter, ST/PC male termination |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
