OP+AVR+2
2 Analog Video, 8 Analog Audio Fiber Receiver
The OP+AVR modules provide professional, broadcast-quality transport of mul-tiple analog audio and video signals over a single fiber optic interface. These mod-ules are capable of transporting up to eight analog video channels and 64 analog audio channels over this fiber interface, using an innovative daisy-chain design to maximize the fiber optic bandwidth. Occupying two slots within the 6800+™ frame, this solution allows for up to 20 independent analog video signals and 80 analog audio channels in a single 2RU frame.
Since the analog video is not decoded, phase information is kept intact, allow-ing applications such as black burst transport over long distances for genlock purposes.
The OP+AVR modules support up to one video and four audio channels, while the OP+AVR+2 modules support up to two video and eight audio channels. As well, an electrical-only expansion version of the OP+AVR+2 (OP+AVR+EXP) can be used along with an initial optical version to create a daisy-chained configuration capable of supporting up to eight video and 64 audio channels on a single optical channel.
Fiber optic receivers are available in both PIN (standard) and APD (high-sensitivity) options, allowing for in-building, campus or metro-distance applications.
These modules can be controlled manually via card-edge controls or remotely using either CCS Navigator™, third-party SNMP-based control applications, HTTP Web browser (with QXFE-series frames only) or NUCLEUS™ control panels.
Features
- One fiber input: either single- or multi-mode
- Available with PIN or high-sensitivity APD receiver options
- Up to two composite video outputs (NTSC, PAL-B, PAL-M)
- Up to eight balanced analog audio outputs
- Electrical-only expansion module allow for daisy-chaining of up to eight receive modules
- Hot-swappable
- Occupies two slots in the 2RU FR6802+QXFE 6800+ frame or the standalone FR6800+MB 6800+ Mix Box
- HTTP control via Ethernet-equipped 6800+ 2RU frames
- Optional CCS Navigator applications for remote Ethernet PC-based status monitoring and control
- Standard SC/PC-type fiber optic connector
- Optional FC/PC-type or ST/PC-type fiber optic connector
Images/Diagrams
Block Diagram
Back Module
Specifications
Specifications and designs are subject to change without notice.
| Optical Input | |
| Number of Inputs | 1 |
| Connector | SC optical connector |
| Input Level | <800 mV pk-pk differential |
| Wavelength | 1260 to 1620 nm |
| Overload | 0 dBm, -5 dBm (high sensitivity option) |
| Sensitivity | -20 dBm, -30 dBm (high-sensitivity option) |
| Analog Composite Video Output | |
| Number of Outputs | 2 (75 ohms terminated) |
| Connector | BNC (IEC169-8) |
| Standard | NTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Signal Quantization | 12-bit |
| Impedance | 75 ohms |
| Return Loss | >40 dB to 6 MHz |
| DC Offset | <±50 mV |
| SNR | >54 dB RMS to 6 MHz |
| Analog Audio Output | |
| Number of Inputs | 8 mono channels |
| Connector | Weidmϋller 24-pin locking header-socket pair |
| Output Audio Level | 28 to 16 dBu (adjustable in 2 dB increments) |
| Output Impedance | 66 ohms |
| Frequency Response | <±0.1 dB @ 0 dBFS (+28 dBu), 20 Hz to 20 kHz, typical |
| THD | >90 dB @ 1 kHz, -1 dBFS = +23 dBu (66 ohms) or -1 dBFS = +17 dBm (600 ohms), typical |
| SNR | >100 dB @ -60 dBFS |
| Cross talk | >95 dB, 20 Hz to 20 kHz, typical |
| Linearity | <±1.0 dB (to -100 dBFS), typical |
| Power and Temperature | |
| Operating Temperature | 41° to 113° F (5° to 45° C) |
| Power Consumption | <10 W |
| Start Up Time | <5 sec |
| Expansion Inputs (All Modules) | |
| Number of Inputs | 1 |
| Connector | BNC (IEC 169-8) |
| Standard | Proprietary |
| Impedance | 75 ohms |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Return Loss | >18 dB, 5 MHz to 1.5 GHz |
| DC Offset | 0 V ± 0.5 V |
| Rise and Fall Times | 0.4 to 1.5 ns |
| Overshoot | <10% |
| Jitter | <0.2 UI, pk-pk |
| Expansion Outputs (All Modules) | |
| Number of Outputs | 1 |
| Connector | BNC (IEC169-8) |
| Standard | Proprietary |
| Impedance | 75 ohms |
| Signal Level | 1 V pk-pk; ±6 dB nominal |
| Return Loss | >18 dB, 5 MHz to 1.5 GHz |
| DC Offset | 0 V ± 0.5 V |
| Rise and Fall Times | 0.4 to 1.5 nS |
| Overshoot | <10% |
| Jitter | <0.2 UI, pk-pk |
Ordering Information
| OP+AVR+2+D | 2 video, 8 audio, PIN receiver |
| OP+AVR+2+HI+D | 2 video, 8 audio, APD receiver |
| OP+AVR+2+EXP | 2 video, 8 audio, AVR expansion (no optics) |
| OP+OPT+AVR+2 | Software upgrade key for OP+AVR+ to OP+AVR+2 |
| Connector Options | |
| OP+OPT+ST | OPTO+ -ST connector option for OPTO+ fiber modules |
| OP+OPT+FC | OPTO+ -FC connector option for OPTO+ fiber modules |
| Compatible with the FR6822+QXFE frame | |
| Cable Options | |
| OP+CBL+1M-SCPC | Single-mode fiber cable, 1 meter, SC/PC male termination |
| OP+CBL+1M-STPC | Single-mode fiber cable, 1 meter, ST/PC male termination |
| OP+CBL+5M-SCPC | Single-mode fiber cable, 5 meter, SC/PC male termination |
| OP+CBL+5M-STPC | Single-mode fiber cable, 5 meter, ST/PC male termination |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
