Adobe PDF Icon Print Friendly Version

DA-DHROOE6803+D

Fiber Receiver, Dual 1x4 or Single 1x8, Quad Coaxial Out/Fiber Transmitter

The DA-DHROOE6803+D HD/SD/ASI fiber distribution amplifier (DA) is ideal for use with the 6800+™ modular core processing platform. It is designed for distribution applications requiring a mixture of medium-haul and medium/long-haul signal paths within a multifloor facility or across metro-type distances.

This DA can be configured as a dual-channel unit with four outputs for each input (two 1x4) or as a single-channel 1x8 unit with built-in automatic changeover (ACO) and four outputs each for fiber and coaxial. The DA-DHROOE6803+D also features an SFP LC-type fiber dual transmitter with built-in optical-to-electrical (O-to-E) conversion.

Built-in ACO protects your signal path while allowing you to designate which input is primary and which is secondary. This capability leverages your investment and allows a backup feed directly on the DA. Capable of broadcast-quality perfor-mance that exceeds SMPTE specifications, the DA-DHROOE6803+D comes stan-dard with software configuration of all parameters, alarms and remote indication of signal presence.

Features

  • Dual-channel 1x4 HD/SD/ASI distribution with one fiber input, two fiber outputs and two coaxial outputs each
  • Single-channel 1x8 HD/SD/ASI distribution with backup fiber input, four fiber and four coaxial outputs
  • Built-in ACO protection when configured as 1x8 with a backup fiber input
  • Highly cost-effective distribution amp with reclocked outputs and fiber IO
  • High density: dual- or single-channel residing on each card and two-slot back module
  • Automatic or forced rate detection and reclocking (reclocking can be bypassed)
  • Identical polarity for ASI compliance on all outputs
  • Feedback status reports input signals present and locked
  • Card-edge control with LED feedback
  • Remote control with status and alarm
  • Provides 20 channels of 1x4 distribution in a 2RU frame with low power consumption (for use in the FR6822+QXFE frame)
  • Inputs: Two (1310 nm) SFP LC-type connectors, dual receiver
  • Outputs: Four (1310 nm) SFP LC-type connectors, dual transmitter + four BNC coax outputs

Images/Diagrams

Block Diagram

DA-DHROOE6803+BD.jpg

Back Module

DA-DHROOE6803+BM.jpg

Specifications

Specifications and designs are subject to change without notice.

Signal TypeHD, SD, ASI
ConnectorBNC (IEC 169-8), SFP LC type fiber interface
Impedance75 ohms
Return Loss>15 dB to 1485 MHz
>10 dB to 2.97 Gb/s
Cable equalization:
270 Mb/s>984 ft (350 m) Belden 1694 or equivalent
1.485 Gb/s>492 ft (140 m) Belden 1694 or equivalent
Number of Outputs8
Signal TypeHD, SDI, ASI
ConnectorBNC (IEC 169-8), SFP LC type fiber interface
Impedance75 ohms
Return Loss>15 dB to 1485 MHz
>10 dB to 2.97 Gb/s
Signal Amplitude800 mV ±10%
DC Offset0 V ±0.5 V

Rise and fall time:
270 Mb/s400 to 700 ps (20 to 80% amplitude)
1.485 Gb/s<270 ps (20 to 80% amplitude)
Overshoot<10% of amplitude
Jitter<0.2 UI pk-pk

Power Consumption<6.0 W

Propagation Delay
DA-DHROOE6803+D~4 ns (for reference only)

Temperature
Operating Temperature32° to 122° F (0° to 50° C)
Performance Temperature50° to 104° F (10° to 40° C)

Start-Up Time
DA-DHROOE6803+DApproximately 3 sec

Ordering Information

DA-DHROOE6803+DDual-channel 1x4 with O-to-E plus fiber out or single 1x8 with O-to-E plus fiber out and ACO backup in, HD/SD/ASI with reclocking, 2 slots (dual fiber in x 2 coaxial plus 2 fiber out; single fiber in x 4 coaxial plus 4 fiber out with ACO fiber input)
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628