Adobe PDF Icon Print Friendly Version

DA-HRO6803+D

Fiber Receiver or Coaxial In, Dual 1x4 or Single 1x8, Fiber Transmitter/Coaxial Out

The DA-HRO6803+D/DX single-channel distribution amplifier (DA) with fiber input and output provides one channel of coaxial or fiber HD/SD/ASI signal distribution with cable equalizing and reclocking. This DA uses an SFP-type fiber transceiver with built–in electrical-to-optical (E-to-O) and optical-to-electrical (O-to-E) conversion and is designed for use with the 6800+™ modular core processing platform.

The DA-HRO6803+D is configured to function as a single-channel DA with eight outputs (1x8). One input and one output are fiber. The DA-HRO6803+D can be ordered without the SFP transceiver (+DX) installed to allow for expansion into fiber connectivity when ready.

The DA-HRO6803+D provides 10 channels of 1x8 HD/SD/ASI distribution in a 2RU 6800+™ frame with low power consumption and non-inverting ASI compatibility on all outputs.

The DA-HRO6803+D can protect your signal path with built-in automatic changeover (ACO). The ACO can operate between the coaxial and fiber inputs. The user can select which input is designated as primary and which is designated as secondary. This further leverages your investment and allows a backup to feeds directly on this DA.

The DA-HRO6803+D/DX features broadcast-quality performance that exceeds SMPTE specifications. Software configuration of all parameters and remote indication of signal presence and alarms are standard.

Features

  • Single-channel 1x8 HD/SD/ASI distribution using one coaxial or one fiber input and seven coaxial and one fiber outputs
  • Cost-effective DA with equalizing and reclocking
  • Automatic cable equalization on inputs
  • Automatic or forced rate detection
  • Reclocking with automatic or forced bypass
  • Identical polarity for ASI compatibility on all outputs
  • Built-in ACO protection between all inputs (fiber and coaxial)
  • Feedback status reports input signals present and locked
  • Card-edge control with LED feedback
  • Remote control with status and alarm
  • 10 channels of 1x8 distribution in a 2RU 6800+ frame

Input

  • One (1310 nm) SFP LC-type connector transceiver — receive component
  • One BNC coaxial input

Output

  • One (1310 nm) SFP LC-type connector transceiver — transmit component
  • Seven BNC coaxial outputs

Images/Diagrams

Block Diagram

DA-HRO6803+D-DX-BD.jpg

Back  Module

DA-HRO6803+D-DX-BM.jpg

Specifications

Specifications and designs are subject to change without notice.

Signal TypeHD, SD, ASI
ConnectorBNC (IEC 169-8), SFP LC type fiber interface
Impedance75 ohms
Return Loss>15 dB to 1485 MHz
>10 dB to 2.97 Gb/s
 
Cable Equalization:
270 Mb/s>984 ft (350 m) Belden 1694 or equivalent
1.485 Gb/s>492 ft (140 m) Belden 1694 or equivalent
Number of Outputs8
Signal TypeHD, SDI, ASI
ConnectorBNC (IEC 169-8), SFP LC type fiber interface
Impedance75 ohms
Return Loss>15 dB to 1485 MHz
>10 dB to 2.97 Gb/s
Signal Amplitude800 mV ±10%
DC Offset0 V ±0.5 V
 
Rise and Fall Time:
270 Mb/s400 to 700 ps (20 to 80% amplitude)
1.485 Gb/s<270 ps (20 to 80% amplitude)
Overshoot<10% of amplitude
Jitter<0.2 UI pk-pk
 
Power Consumption<6.0 W
 
Propagation Delay
DA-HRO6803+D~4 ns (for reference only)
 
Temperature
Operating Temperature32° to 122° F (0° to 50° C)
Performance Temperature50° to 104° F (10° to 40° C)
 
Start-Up Time
DA-HRO6803+DApproximately 3 sec

Ordering Information

DA-HRO6803+D1x8 DA, HD/SD/ASI with reclocking, fiber and coaxial inputs and outputs, 2 slots
 
DA-HRO6803+DXDA-HRO6803+D DA without SFP (optional transceiver)
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628