- Products & Solutions
- / Master Control and Branding
- / IconMaster™
IconMaster™
Master Control Switcher
IconMaster™ is a cost-effective, modular master control and branding solution, offering the ability to combine critical master control functions with multi-integrated branding — all in a modular card format with room to add and grow as requirements change.
IconMaster is both SD and HD-ready, right from the outset. Customers are able to migrate from an SD Master Control to an HD Master Control by means of a straightforward configuration utility, without additional cost or hardware changes.
Features
Future-proofed
- SD or HD configurable with no hardware changes
- Upgrade from IconLogo™ branding to IconMaster Master Control
- ROHS compliant
- Up to 8 channels controlled from one RCP (remote control panel) or SCP (software control panel)
Flexible
- Optional assignable (two-channel) squeeze back with 3rd background input
- Direct control of up to 12 Auxiliary bus router inputs on up to 12 Aux router busses
- Program Bus Hot Cut for quick single-button on-air program changes
- Fast reset for single-button reset of audio and video processing parameters
- Hot keys for keyer changes, audio overs, background changes
- Quick Select single-button macros to save and recall source, keyer, and audio setting combinations
- 16 programmable and flexible effects with multiple segments for powerful looks
Routing Options
- Internal routing with 12 inputs
- External routing with 12 or 22 directly accessible inputs and connection to any size primary router
- Dynamic routing control capabilities allows router inputs to be re-mapped on-the-fly
- Automatic control of emergency backup source routing
Control
- 12 or 22-input desk mount/rack mount control panel
- Industry-standard buttons with LEDs for source selection and transitions
- User configurable LCD buttons
- Optional intelligent audio control panel
- Optional enhanced software control application
Multi-channel modular design
- Two NEO®-slot solution provides up to six channels in 3RU
- Three NEO®-slot solution with optional discrete audio processing
- Audio monitoring (embedded audio with external routing)
- Operate multiple channels from single panel including master/slave modes
Audio Control
- Dedicated audio control panel offers direct access to channel gains
- Multiple audio channels can be ganged together as a cluster and controlled from a single knob
- Audio cluster gain values are tracked independently of sub-channel providing powerful gain control
- Directly accessible audio over ratio control
Features
- Full next-event preview
- 6 Keyers with assignable key priorities
- 2 external, key/fill
- 4 internal branding keys with up to 4GB online logo storage
- Static and animated logos
- Analog and digital clocks
- Crawls, static text and EAS/Amber Alert
- Assignable clean output
- Flexible audio options
- 8 channels discrete (SD or HD)
- 8 or 16 channels embedded (SD)
- 16 channels embedded (HD only)
- 2 audio overs with dedicated inputs
- Full-channel audio assignment and processing
- Machine control via serial or GPI outputs
- Full automation control
Options
- Relay bypass with dedicated bypass input
- Discrete AES audio inputs/outputs
- 2-channel video effects/squeeze back
- Text crawl with dynamic data insertion via RSS and ODBC connectivity
- EAS and Amber Alert (Emergency Alert System) insertion
- Internal 12 input routing
Product Details
Enhanced Control
IconMaster features a 12 or 22-input deskmount/rackmount control panel and industry-standard buttons with LEDs for source selection and transitions as well as fully configurable LCD buttons. Intelligent audio control panel and touch-screen configuration and control are available as options.
The IconMaster is fully controllable under automation, and is supported by a broad number of automation systems including Harris’ D-Series and ADC playout automation systems.
Unsurpassed Flexibility
With IconMaster, flexibility is a core feature. With assignable (two-channel) squeeze back position, you have the power to choose. Internal routing with 12 inputs is offered, and external routing with 12 or 22 directly accessible inputs is available, with or without emergency bypass routing.
Superior Branding
IconMaster features superior branding, including four internal and two external key layers for branding. Standard features supported include static and animated logos, analog and digital clock capability, optional crawls, optional temperature probe, optional EAS (Emergency Alert System) and Amber Alert.
IconMaster is based on our industry-leading NEO modular platform, and IconMaster is the only Master Control that can be combined with other advanced applications to create a complete, self-contained channel release system.
IconMaster — for today’s and tomorrow’s master control and branding needs.
Images/Diagrams
IconMaster Remote Control Panel - ICONM-RCP-MAF
IconMaster Navigator Software Control Panel - MGI-GUI
Specifications
Specifications and designs are subject to change without notice.
| Serial Digital Video Inputs | |
| Number of Inputs | 7; A, B, Fill1, Key1, Fill2, Key2, squeeze background |
| Standard: | |
| SDTV | 270 Mb/s 525/625 per SMPTE 259M-C |
| HDTV | 1.485 Gb/s serial per SMPTE 292M 1080i/720p 59.94 Hz/50Hz |
| Equalization | Automatic up to 100 m (328 ft.) of Belden 1694 |
| Connector Type | BNC |
| Return Loss (HD only) | >18 db |
| Impedance | 75 ohms |
| Genlock Input | |
| Connector Type | BNC |
| Number of Inputs | 1 Genlock |
| Return Loss | -40 dB to 6 MHz |
| Impedance | 75 ohms |
| Reference Type | NTSC/PAL, color black, or 525/625 comp sync or Tri Level per SMPTE 240M 29.97/30/25 |
| Level | 200 mV to 2 V nominal |
| Connector Type | BNC |
| Serial Digital Video Outputs | |
| Standard:
SDTV HDTV | 270 Mb/s 525/625 per SMPTE 259M 1.485 Gb/s serial per SMPTE 292 M 1080i/720p 59.94 Hz/50 Hz |
| Connector Type | BNC |
| Number of Outputs | 4; PGM (2), PVW, CLEAN |
| Return Loss | >18 db |
| Impedance | 75 ohms |
| Embedded Audio | |
| SDTV | Per SMPTE 272M (embedded as 20 bit audio only) |
| HDTV | Per SMPTE 299M (embedded as 24 bit audio) 48 KHz per AES3-1992 |
| Channels | 2 groups SD, 4 groups HD |
| Mode | Delete existing and rewrite new audio groups |
| Discrete Audio for Audio Over | |
| Inputs | 2 AES (internal routing) |
| Resolution | 24 bit operation |
| Sampling Rate Input | 48 KHz (33, 44.1 KHz) |
| Sample Rate Converter
SRC Disable | No |
| Connector | Multi-pin DB62/coax or balanced inputs on terminal strips on optional breakout module |
| Format | AES audio levels |
| Optional Discrete AES Audio The following specifications apply when the optional MKA-3901 audio module is used in conjunction with the IconMaster. | |
| Number of Inputs | 4 AES in each for bus A and B |
| Number of Outputs | 4 AES for PGM, PST, Clean and Monitor |
| Resolution
Input Output | 20- or 24-bit operation, set by data configuration bits (with SRC off)
20- or 24-bit operation, user-selectable |
| Sample Rate Converter
SRC Disable | No |
| Sampling Rate: | |
| Input | 48 KHz (33, 44.1 KHz) |
| Output | 48 KHz |
| Connector | Multi-pin DB62/coax or balanced inputs on terminal strips on optional breakout module |
| Format | AES audio levels |
| Audio Processor | |
| Number of Bus Inputs | 2 - A, B |
| Number of AES Streams | 4 |
| Channel Assignment | Not restricted within A path or B path |
| Modifiers | Left or right invert
Left and right sum Independent left and right level |
| Number of Audio Overs | 2 |
| Transitions | Dissolve, cut, fade-fade, fade-cut, cut-fade |
| Dolby Handling | Restricting transition to “cut”, embedded audio only |
| AES User and Configuration Bits | |
| C bits Input | Read and analysed for Format, word size only |
| C bits Output | Reinserted based on configuration setting
Selectable individually for each AES path |
| U bits Input | Not read or used |
| U bits Output | Reset to 0
Common for all AES paths |
| Monitoring Audio Level | |
| Monitor Gain Control | 0 to 100% (requires audio control panel or software application) |
| VANC Data For 525 systems, line 21 may be selected to be part of active picture or blanking. Set this parameter using the IconMaster™ configuration software. | |
| VANC Data | Data will be allowed to “pass through” video processor |
| GPI Inputs and Outputs It is assumed that these inputs/outputs are externally isolated. They are low voltage TTL style input/outputs. | |
| GPI Input | |
| Quantity | 18 |
| Type | Non isolated TTL |
| Polarity | software specified |
| Voltage Range | -0.3 V to 5.3 V max |
| Current Load | 1 mA |
| Connector | Part of 62-pin “D”-type or terminal strips on optional breakout module |
| GPI Output | |
| Quantity | 13 |
| Type | Open drain |
| Polarity | software specified |
| Voltage Range | -0.3 V to 5.3 V max |
| Load | 40 mA max |
| Connector | Part of 62-pin “D”-type or terminal strips on optional breakout module |
| Power Consumption | |
| Control Panel | 250 W maximum; 150 W typical |
| Frame | NEO (1RU) or NEO (3RU): <25 W |
| Timecode Input | |
| Standard | ANSI/SMPTE12M time code (LTC) |
| Electrical | 0.5 – 12 Vp-p |
| Impedance | >10 kW |
| Connector | Part of 62-pin “D”-type or terminal strips on optional breakout module |
| Serial Communications Interface | |
| Standard | RS-422 (SMPTE S207M) |
| Connector | Female 9-way “D” type |
| Max Output Drive | –0.25 V to + 6 V |
| Receiver Input Sensitivity | ±200 mV |
| Data Comms | 38400 baud
8 bit No parity 1 stop bit |
| Ethernet Port | |
| Standard | 10/100Base-T IEEE 802.3 u |
| Connector | 8-pin RJ-45 |
| Temperature Probe | |
| Electrical | 24 V to 75 R |
| Connector | Part of 62-pin “D”-type or terminal strips on optional breakout module |
| Miscellaneous | |
| Performance temperature | 41° F – 104° F (5° – 40° C) |
| Operating temperature | 32° F – 122° F (0° – 45° C) |
Ordering Information
| SD/HD IconMaster Master Control Systems | |
Complete SD/HD IconMaster systems come standard with configurable SD/HD master control with an embedded multi-layer branding engine. Each system includes a 3RU NEO frame with redundant power supplies, IconMaster Master Control module set with 6 layers of keying (2 external, 4 internal branding keys), 2 discrete AES audio overs, GPI/serial breakout with relay bypass. | |
| Control panels are ordered separately. | |
| Embedded Audio Only Systems | |
| ICON-S-0-E | SD/HD IconMaster system with embedded audio support, external video router required. Occupies 2 NEO slots |
| ICON-S-12-E | SD/HD IconMaster system with embedded audio support and internal routers to support 12 video inputs. Occupies 4 NEO slots |
| ICON-S-P12-E | SD/HD IconMaster system with embedded audio support and external Panacea router to support 12 video inputs. Occupies 2 NEO slots |
| ICON-S-P12-CQ | SD/HD IconMaster system with embedded audio support and external Panacea clean/quiet router to support 12 video inputs. Occupies 2 NEO slots |
| Discrete Balanced AES Audio Systems | |
| ICON-S-0-B | SD/HD IconMaster system with mixed embedded audio and up to 4 balanced AES in/out/monitor support, balanced audio breakout, external video and AES router required. Occupies 3 NEO slots |
| ICON-S-12-1B | SD/HD IconMaster system with mixed embedded audio and 1 balanced AES in, 4 balanced AES out/monitor support, balanced audio breakout and internal routers to support 12 video and 12x 1 balanced AES inputs. Occupies 7 NEO slots |
| ICON-S-12-2B | SD/HD IconMaster system with mixed embedded audio and 2 balanced AES in, 4 balanced AES out/monitor support, balanced audio breakout and internal routers to support 12 video and 12x 2 balanced AES inputs. Occupies 9 NEO slots |
| ICON-S-P12-1B | SD/HD IconMaster system with mixed embedded audio and 1 balanced AES in, 4 balanced AES out/monitor support, balanced audio breakout with relay bypass and external Panacea router to support 12 video and 12x 1 balanced AES inputs. Occupies 3 NEO slots |
| ICON-S-P12-2B | SD/HD IconMaster system with mixed embedded audio and 2 balanced AES in, 4 balanced AES out/monitor support, balanced audio breakout with relay bypass and external Panacea router to support 12 video and 12x 2 balanced AES inputs. Occupies 3 NEO slots |
| Discrete Coax AES Audio Systems | |
| ICON-S-0-C | SD/HD IconMaster system with mixed embedded audio and 4 coax AES in/out/monitor support, coaxial audio breakout with relay bypass, external video and AES router required. Occupies 3 NEO slots |
| ICON-S-12-1C | SD/HD IconMaster system with mixed embedded audio and 1 coax AES in, 4 coax AES out/monitor support, coaxial audio breakout with relay bypass and internal routers to support 12 video and 12x 1 coax AES inputs. Occupies 7 NEO slots |
| ICON-S-12-2C | SD/HD IconMaster system with mixed embedded audio and 2 coax AES in, 4 coax AES out/monitor support, coaxial audio breakout with relay bypass and internal routers to support 12 input video and 12x 2 coax AES routers. Occupies 9 NEO slots |
| ICON-S-P12-1C | SD/HD IconMaster system with mixed embedded audio and 1 coax AES in, 4 coax AES out/monitor support, coaxial audio breakout with relay bypass and external Panacea routers to support 12 video and 12x 1 coax AES inputs. Occupies 3 NEO slots |
| ICON-S-P12-2C | SD/HD IconMaster system with mixed embedded audio and 2 coax AES in, 4 coax AES out/monitor support, coaxial audio breakout with relay bypass and external Panacea routers to support 12 input video and 12x 2 coax AES routers. Occupies 3 NEO slots |
| Control Panels | |
| ICONM-RCP-M | SD/HD IconMaster Remote Control Panel |
| ICONM-RCP-MA | SD/HD IconMaster Remote Control Panel with enhanced audio control |
| ICONM-RCP-MAF | SD/HD IconMaster Remote Control Panel with fader bar and enhanced audio control |
| ICONM-RCP-MF | SD/HD IconMaster Remote Control Panel with fader bar |
| ICONM-RCP-A-UPG | SD/HD IconMaster Audio Control Panel for customer field retrofit to IconMaster base panel |
| ICONM-RCP-F-UPG | SD/HD IconMaster Manual Fader Bar for customer field retrofit to IconMaster base panel |
| ICONM-NAV | SD/HD IconMaster software application, auxiliary IconMaster controls graphical interface |
| Master Control Module Sets | |
| ICONM-E | SD/HD IconMaster master control module set with embedded audio support, 6 layers of keying (2 external, 4 internal branding keys), 2 discrete AES audio overs. Occupies 2 NEO slots |
| ICONM-B | SD/HD IconMaster master control module set with embedded audio and 4 balanced AES audio support, 6 layers of keying (2 external, 4 internal branding keys), 2 discrete AES audio overs. Occupies 3 NEO slots |
| ICONM-VAB | SD/HD IconMaster master control module set with embedded audio and 4 balanced AES audio support, 6 layers of keying (2 external, 4 internal branding keys), 2 discrete AES audio overs, balanced AES audio breakout and video relay bypass. Occupies 3 NEO slots |
| ICONM-VAC | SD/HD IconMaster master control module set with embedded audio and 4 balanced AES audio support, 6 layers of keying (2 external, 4 internal branding keys), 2 discrete AES audio overs, coax to balanced AES audio breakout and relay bypass. Occupies 3 NEO slots |
| Master Control Options | |
| ICONM-FX | SD/HD IconMaster two channel squeeze-back effects |
| ICONM-CRAWL | SD/HD IconMaster Character Crawl with Static text insertions |
| ICONM-EAS | SD/HD IconMaster Interface to TFT and SAGE for Emergency Alert System (includes CRAWL option) |
| ICONM-ODBC | SD/HD IconMaster Content Editor for IconLogo text crawls or static text with web and database connectivity |
| Master Control Components | |
| ICONM-AB | IconMaster 4 AES Discrete Audio Input/Output/Monitor |
| ICONM-BO-V | IconMaster GPI/serial Audio Breakout Panel with relay bypass |
| ICONM-BO-VAB | IconMaster Discrete Balanced Audio Breakout with relay bypass |
| ICONM-BO-VAC | IconMaster Discrete Coax Audio Breakout with relay bypass |
| Master Control Branding Memory Options | |
| ICONM-CF512 | Compact Flash (Type 1) Upgrade, 512MB card |
| ICONM-CF1024 | Compact Flash (Type 1) Upgrade, 1 GB card |
| ICONM-CF2048 | Compact Flash (Type 1) Upgrade, 2 GB card |
| ICONM-CF4096 | Compact Flash (Type 1) Upgrade, 4 GB card |
| ICONM-CF8192 | Compact Flash (Type 1) Upgrade, 8 GB card
Note: only for MGI-3902 and MGI-3903-based systems |
| ICONM-DDR512 | DDR Memory Upgrade, 512MB module
Note: only for MGI-3901-based systems |
| ICONM-DDR1024 | DDR Memory Upgrade, 1 GB module
Note: only for MGI-3901-based systems |
| ICONM-DDR2-1024 | DDR2 Memory upgrade, 1 GB module
Note: only for MGI-3902 and MGI 3903-based systems |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe, Middle East & Africa +44 (0) 118 964 8200
- Asia, Pacific Rim +852 2776 0628
