Customers: we're here for you
SRD6800+D
Satellite Receiver and Demodulator Module
The SRD6800+D satellite receiver and demodulator module provides a cost effective alternative to more expensive single-function satellite demodulation units.
Packed with a rich list of features, the SRD6800+D is capable of receiving various types of satellite signals and provides an industry-standard ASI output for distribution or decoding.
The SRD6800+D is fully interoperable with other modules in the extensive 6800+™ line.
When used with the IPA6800+D, the SRD6800+D allows the distribution of satellite signals anywhere over a wide area network (WAN).
Features
- L-Band satellite tuner supports
- DVB-S (QPSK)
- DVB-S2 (QPSK and 8PSK)
- Four active software selectable F-type inputs
- 950 to 2150 MHz input frequency selection
- DC power and 22 Hz tone configurable on selected input
- Conditional Access (CA) support
- DVB fixed-key decryption (BISS modes 0, 1, and E)
- PID filtering
- ASI input for CA decrypting or PID filtering
- Control using CCSP and over IP
Images/Diagrams
Block Diagram
Back Module
Specifications
Specifications and designs are subject to change without notice.
| Receiver | |
| Connectors | 4 F-Type |
| Input Impedance | 75 ohms |
| Baud Rate Range | 2 to 45 Mbaud (DVB-S), 10 to 30 Mbaud (DVB-S2) |
| Modulation | DVB-S (QPSK) ETSI EN 300 421 |
| DVB-S2 (QPSK/8PSK) ETSI EN 302 307 | |
| Inner Code | |
| DVB | QPSK 1/2, 2/3, 3/4, 5/6, 7/8 |
| DVB-S2 | QPSK 1/2, 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 |
| 8PSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 | |
| L-Band Frequency Range
| 0.9400 to 2.1500 GHz (In 0.0005 GHz steps) |
| Maximum Total Input Power | -25 dBm |
| Minimum Signal Level | -55 dBm |
| ASI Input | |
| Connector | 1 BNC |
| Clock Rate | 270 MHz ±100 ppm |
| Logic Levels | 880 to 200 mV pk-pk |
| Data Rate | 0 to 210 Mb/s |
| Packet Size | 188 or 204 |
| Applicable Standards | ETSI TR 101891 |
| ASI Output | |
| Connector | 3 BNC |
| Clock Rate | 270 MHz ±1 ppm |
| Logic Levels | 800 mV pk-pk ±10% |
| Data Rate | 0 to 210 Mb/s in 100 b/s increments |
| Packet Size | 188 or 204 |
| Applicable Standards | ETSI TR 101891 |
| Operating Temperature | |
| SRD6800+ Modules | 41° to 113° F (5° to 45° C) |
| Physical | Double half-slot 6800+ module, RoHS-compliant |
| Electrical | |
| Power Consumption | 12 W |
| Regulatory Compliance | |
| Safety Compliance (Pending) | UL and cUL (United States-UL 1950 and Canada-CSA C22.2, No.950) |
| CE (Pending) | CE |
| FCC Certification (Pending) | Complies with FCC Sub-Part 15, Class A |
| Frames Supported | |
| FR6822+QXFE, and FR6800+MB | |
Ordering Information
| IMPORTANT: Certain module combinations may exceed the power and heat dissipation capabilities of the frames. | |
| HALRSRD6800+D | Satellite receiver and demodulator with double-slot rear connector module |
| HALRSRD6800+ | Satellite receiver and demodulator less rear connector module |
| HALRSRD6800+R | Satellite receiver and demodulator with double rear connector module |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
