CM-30
IP Network Conversion Card for T1/E1 Multiplexers
Converting your existing Intraplex T1 multiplexer to IP is as easy as plugging in a card.
IP data transport can offer bandwidth and reliability equivalent to T1/E1 circuits with lower recurring costs. The Intraplex® CM-30 IP network card lets you retain the rock-solid reliability and outstanding quality of your current Intraplex® T1 or E1 system, while migrating to lower-cost, high-performance IP networks such as MPLS.
Installation is quick and easy. Built-in intelligence allows you to field-convert your T1/E1 system in minutes. The CM-30 is compatible with the existing interface cards for audio, voice and data traffic in your Intraplex multiplexers, and works with SynchroCast3™ simulcast systems for FM transmission. For system expansion, Intraplex frames equipped with the CM-30 are fully interoperational with Intraplex® NetXpress™ and NetXpress™ LX IP multiplexers.
The CM-30 is an excellent choice for your IP upgrade because it pays for itself by reducing your network services expenses — while retaining the superior operation of the Intraplex system you trust.
Specifications
Specifications and designs are subject to change without notice.
| Network Interface | |
| Ethernet Data Rate | 10/100Base-T (10 or 100 Mb/s)
Full duplex auto-negotiation with network |
| Network Connections | Port 1 — WAN — RJ-45
Port 2 — LAN — RJ-45 |
| Circuit Connection | Up to 32 streams/connections
Point-to-point unidirectional Point-to-point bidirectional Point-to-multipoint unidirectional multicast per IGMP v2 Network Protocols Supported IP, TCP, UDP, RTP, DHCP, DNS, HTTP, FTP, Telnet, NTP, SNMP, v2c, RTCP, ARP, ICMP, IGMP v2 |
| Timing | Internal, external, RS-422 clock input
Adaptive to incoming program stream Timing out, RS-422 clock output |
| Stream Parameters (per stream) | |
| Forward Error Correction | High, low, off; user-adjustable |
| Packet Optimization | Packet size/rate, allows control over the inherent tradeoff between overhead and delay
Jitter buffer depth to 128 packets, provides compensation in excess of 1 second of network jitter User-adjustable |
| Quality of Service | IPv4 Type of Service (ToS) tagging
Differentiated Service (DiffServ) |
| Status and Diagnostics | |
| Network Performance | |
| Statistics (per stream) | Packet loss, packets received, packets sent, packets dropped, packet count and delay variation |
| Loopbacks | Received stream loopback, equipment loopback |
| Remote Management | |
| Web browser user interface
SNMP network management interface | |
| Regulatory Compliance | |
| CE compliant, FCC Part 15 Class A, UL 1950, RoHS compliant | |
| Performance cannot be guaranteed unless the IP network used has sufficient designated bandwidth to support the traffic that was previously carried on the T1/E1 system. | |
Ordering Information
| IX-CM-30-PKG | Upgrade kit for Intraplex T1/E1 systems, containing 2 CM-30 cards and 2 MA-230 interface cards |
Notes:
Intraplex CM-30 IP network cards are fully compatible with current Intraplex multiplexers such as the STL HD, AudioLink PLUS™, and Access Server, and nearly all other installed Intraplex T1/E1 multiplexer frames.
The CM-30 can be used in place of — not at the same time as — the T1 or E1 common module (CM-3, CM-5, CM-5RB, CM-6, CM-7 or CM-7RB) card in an existing Intraplex T1/E1 multiplexer. However, a T1 or E1 multiplexer that has been converted for use on IP with the CM-30 can be converted back to T1 or E1 at a later date simply by removing the CM-30 and reinserting the T1/E1 card.
Contact your local representative to confirm that the CM-30 can work for you.
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe, Middle East & Africa +44 (0) 118 964 8200
- Asia, Pacific Rim +852 2776 0628
