- Products & Solutions
- / Radio STL, Contribution and Distribution
- / Intraplex CrossConnect Server
Intraplex® CrossConnect Server
T1/E1 CrossConnect Routing/Switching System
The Intraplex® CrossConnect system and CrossConnect server provide routing and switching capabilities for up to six T1 or E1 circuits, as well as automatic backup switching for STL links. The CrossConnect Server also accepts a wide variety of plug-in modules for integrated drop and insert of voice, data and program audio. Station operators can dynamically route services among multiple studio and transmitter locations, sharing programming and administrative resources among geographically separated facilities. CrossConnect Servers reduce transport link requirements, providing cost savings in both point-to-point and point-to-multi-point networks.
Broadcasters can mix and match program audio, voice and data feeds among multiple studio and transmitter locations and save on programming, talent and administrative costs by sharing transmission resources among stations.
Harris® Intraplex CrossConnect Systems and Servers can help ensure the most efficient use of the available transmission capacity and reduce costs. CrossConnect Systems and Servers give users complete flexibility to combine, interconnect, and multicast traffic among up to six T1 or E1 lines.
Features
- Interface with as many as six T1 or E1 lines
- Cross Connect Servers accept channel cards, providing local voice, data and audio interfaces for up to 48 time slots (T1) or 62 time slots (E1)
- Programmable automatic T1/E1 line protection switching for studio-to-transmitter (STL) links
- Individual time slot routing among all T1/E1 ports
- Automatic protection switching on any of the T1/E1 ports
- Eight time-slot grooming maps
- Multicast encoded audio feeds from a studio to multiple transmitter sites
- IntraGuide® software and optional SCM-IP SNMP proxy provide flexible, intuitive network configuration and management options
Specifications
Specifications and designs are subject to change without notice.
| T1 Inputs/Outputs | |
| Electrical Interface | 6 DSX-1 interface ports per ANSI T1.102-1993 |
| Output Timing | Internal, 1.544 Mb/s 30 PPM
External, RS-422 input Any of the 6 T1 inputs |
| Frame Formats | Extended superframe (ESF)
D4/superframe (SF) |
| Line Codes | Bipolar with 8 zero substitution (B8ZS)
Alternate mark inversion (AMI) |
| Line Build Out (LBO) | Up to 655 ft from standard DSX or CSU LBO 0, -7.5. or -15 dB |
| Connector | 100 ohms RJ-48C |
| E1 Inputs/Outputs | |
| Electrical Interface | 6 E1 interface ports per ITU-T G.703, G.704, G.706 |
| Output Timing | Internal, 2.048 Mb/s 30 ppm
External, RS-422 input Any of the 6 E1 inputs |
| Frame Formats | Channel associated signaling (CAS)
Common channel signaling (CCS) |
| Line Codes | High-density bipolar 3 (HDB3)
Alternate mark inversion (AMI) |
| Connector | 75 ohms BNCs or 100 ohms RJ-48C |
| Throughput Delay | 1 to 3 T1/E1 frames 125 to 375 µS
2 frames average 250 µS |
DS0 Interfaces (Crossconnect Server) | |
| Time Slot Mapping | |
| Maps Supported | 8:2 normal service maps and 6 alternate service maps configurable to switch based on T1 or E1 port failure (BER, LOS, AIS, LOF), external contact closure inputs or ASCII command |
| Switch Time | Protection switching delay programmable down to 1 ms |
| Status and Diagnostics | |
| LED Indicators | Shelf power, normal, alert, alarm
DCS port status, alert, alarm |
| Contact Closures | Shelf alert, Alarm
DCS alert, alarm, active map indicators |
| Diagnostics | T1, E1 and timeslot loopback |
Remote Access and Control
| |
| Physical and Environmental | |
| Power Requirements | 3RU: Universal AC standard
Optional 48 VDC or 24 VDC Optional hot-standby redundant supply 1RU: Universal AC |
| Nominal Power Consumption | DCS-9500/9530: 5 W
DCS-9560: 8 W DCS-9565: 11 W |
| Temperature | 0° to 50° C operating |
| Humidity | 0% to 90% non-condensing |
| Dimensions | 3RU: 5.25 x 14.5 x 19 in. (13.4 x 36.2 x 48.3 cm)
1RU: 1.75 x 14.5 x 19 in. (4.4 x 36.2 x 48.3 cm) |
| Regulatory Compliance | CE Approved
UL 1950 FCC Part 15, FCC Part 68 CS-03 |
Ordering Information
Contact your Harris sales representative for information on ordering these products.
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
