- Products & Solutions
- / Selenio Media Convergence Platform
- / Application Modules
- / Dual-Channel Conversion
SEL-2XD1
Dual-Channel Conversion with Advanced Audio Processing Capability
The Selenio™ SEL-1XD1 and SEL-2XD1 modules provide single-channel and high-density dual-channel video conversion and frame synchronization for 3G/HD/SD/3D signals. These modules are ideal for any broadcast, post-production, cable or mobile facility where processing and synchronization of NTSC/PAL, SD (480i, 576i), HD (720p, 1080i, 1080p/sf) and 3D video and audio (embedded and/or discrete) signals are required.
The SEL-1XD1 and SEL-2XD1 can retime a program signal to a local station clock for the clean processing of all synchronized signals. Signal processing functions include up/down/cross/aspect ratio and basic frame rate conversion (and optional linear frame rate conversion), processing amplifier, color correction and clipping and logo generation/insertion for single- and dual-channel applications.
Features
- Single and dual-channel versions (field license key-upgradable)
- Video conversion
- Up/down/cross
- Aspect ratio
- Frame rate (basic included, linear optional)
- Video frame and audio sync with genlock support
- Time Base Correction
- Video Noise Reduction
- 3 Gb/s and 3D support
- Audio embedder and de-embedder
- Seamless Sound functionality — audio embedding on Loss of Video
- Fast switch for clean/quiet output on hot switch at the input with no output frame freeze
- Dolby® header adjustment
- Fiber TX and/or RX SFP options
- Eight AES unbalanced ports (inputs or outputs) — balanced AES supported via digital audio expansion modules; analog audio supported via analog audio expansion modules
- 10-bit video processing
- Passing of VANC data (closed captioning, subtitling (teletext), AFD, WSS, VI, audio metadata, SMPTE 12M-2 timecode and ABC (US) Brandnet)
- Passing of entire teletext for SD aspect ratio conversion
- Up to 12 frames of HD video delay and 50 frames of SD video delay
- Ability to embed AES on output (fiber or SDI) without video source or genlock
- Ability to embed/de-embed audio metadata
- Video standards operated:
- NTSC, PAL-B, PAL-M
- 525 and 625 (SMPTE 259M)
- 1080i/p
- 1080sf
- 720p (SMPTE 274M/296M)
- 3 Gb/s (SMPTE 424M) Level A/B 1080p
- Loss of video modes:
- Black
- Freeze
- Video processing amplifier (dual-channel version has two) with controls for:
- Luminance gain
- Luminance offset
- Chrominance gain
- Chrominance offset
- White clip
- Black clip
- Hue adjustment
- Color corrector with controls (dual-channel version has two) for:
- RGB gain
- RGB offset
- RGB white slope
- RGB black stretch
- RGB gamma
- Clipping with controls (dual-channel version has two) for:
- RGB white clip
- RGB black clip
- Audio processing amplifier for de-embedded and external audio channels:
- Gain
- Swap
- Invert
- Delay
- Mix (sum)
- Built-in logo generator/inserter (single- and dual- capability), SD memory card not included (1 GB/4 GB Class 4)
- Onscreen Display (OSD) of menu parameters
- I-WINGS sidebar keying built-in using dual-channel version
- Dolby® advanced audio options for encoding and decoding
- DTS Neural Surround™ UpMix/DownMix and DTS Neural loudness control
- Video and audio test generator
- 16-, 20- or 24-bit audio processing
- C, U & V bit transparency
- Auto-detect or user-forced input video standard
- SDI connectivity to both controller modules
- 100BT (control) connectivity to both controller modules
- Four GPI inputs and four GPI outputs with user programmable scripts
- Inputs:
- Two serial digital video/analog composite inputs
- Two frame genlock inputs (composite or tri-level sync)
- Eight AES ports (unbalanced); balanced and analog audio utilize expansion modules
- DARS input (second genlock input can be used for DARS)
- Two RS-232/422 serial ports for external metadata source
- Optional fiber dual input (SFP separately orderable)
- Outputs:
- Two sets of two synchronized serial digital video outputs
- Eight AES ports (unbalanced), balanced and analog audio utilize expansion modules
- Two RS-232/422 serial port metadata outputs
- Optional fiber dual output (x2, SFP separately orderable)
- Shadowed/restored parameter settings when switching video standards
- Ethernet remote control and monitoring (thumbnails and alarms)
- Q-SEE™ thumbnail monitoring support
Product Details
The single- and dual-channel SEL-1XD1 and SEL-2XD1 modules offer comprehensive video and audio processing capabilities, including conversion between video formats, control over the picture, embedded audio processing and audio tracking. Full handling of the embedded audio metadata is provided, including the ability to de-embed and embed audio metadata from external sources.
The modules feature eight AES input/output ports and two 16-channel embedder/de-embedders with internal processing of 32-channels. Analog and digital audio expansion modules provide analog audio interface capability and additional AES inputs and outputs, and internal processing channels.
Back modules can accommodate a dual-fiber input SFP and two dual-fiber output SFPs.
The SEL-1XD1 and SEL-2 XD 1 modules can be controlled remotely using the standard web server element management system, CCS Navigator™ software, HTTP web server or third-party SNMP-based control applications.
For the SEL-1 XD 1 single-channel version, there is the capability to provide the output with or without OSD. For the SEL-2XD1 dual-channel version with one input signal, there is the capability to provide one output with OSD and one output without OSD. In a dual input and output configuration, the OSD may be added to one output channel.
In addition, the SEL-1XD1 and SEL-2XD1 modules are Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in a Selenio frame. For a dual-channel SEL-2XD1 module, one thumbnail is provided. If a second thumbnail is required for the second channel, a video expansion module can be added.
3DTV Functionality
The Selenio SEL-2XD1 dual-channel video converter provides left eye/right eye processing for cameras with beam splitting, including conversion, video and audio synchronization, proc amp, color correction, clipping and logo insertion. Conversions between separate left and right eye signals and frame-compatible formats are supported including side/side and over/under.
The following table highlights the standards that are supported:
| Quality | Definition | # of Connections | 3DTV | |
| Highest | 2 x 3 Gb/s 3D
(2 x SMPTE 424M) | 2 | 2 x 1080p | Production |
| High | 3 Gb/s 3D
(SMPTE 424M) | 1 | 2 x 270p or 2 x 1080i (B),
left eye/right eye content | |
| High | 2 x 1.5 Gb/s 3D
(2 x SMPTE 292M) | 2 | 2 x 270p, or 2 x 1080i | |
| Half | 1.5 Gb/s 3D
(1 x SMPTE 292M) | 1 | 1/2 resolution or better (many variants) | Distribution |
Front Module Connectivity
The Selenio SEL-1XD1 and SEL-2XD1 frame sync modules are interconnected with the two controller modules for SDI and 100Base-T for control and monitoring. An analog reference is available from each reference input on the back of the frame.
Video and Audio Expansion
For additional inputs and outputs and increased functionality, simply add video and audio expansion modules to the Selenio SEL-1XD1 and SEL-2XD1 video conversion application modules.
When an expansion module is installed beside an applications module, an automatic connection takes place. The corresponding block diagram in the graphical user interface is updated, giving the user setup, control and monitoring functions.
Video and audio signals are automatically connected internally over bidirectional high-speed busses, eliminating the need for external cabling.
One video expansion module can be placed beside a video conversion and frame sync application module. Five back module options provide interfaces for electrical and optical inputs and outputs and relay bypass for critical signals upon power loss.
For audio expansion, up to two analog audio expansion modules and/or digital audio expansion modules can be placed beside a frame sync and conversion application module. Audio expansion modules can provide additional audio processing support such as Dolby® codecs, and DTS Neural Surround™ Up Mix/DownMix and DTS Neural loudness control.
When viewing the front of the frame, the video expansion is added to the left of the frame sync applications module (lower slot number). Audio expansion modules are added to the right of the frame sync applications module (higher slot numbers).
Audio Expansion Configuration
Digital and analog audio expansion modules can be added to video conversion modules in the following configurations:
| Audio Expansion Configurations | AES Inputs/Outputs | AES Inputs | AES Outputs | Analog Inputs | Analog Outputs |
| Main Video and Audio Module | 8 | 0 | 0 | 0 | 0 |
| Digital Audio Expander Module | 0 | 8 | 16 | 0 | 0 |
| Analog Audio Expander Module | 0 | 0 | 0 | 8 | 8 |
| Configurations #1 | |||||
| Main Video and Audio Module | 8 | 0 | 0 | 0 | 0 |
| Digital Audio Expander Module | 0 | 8 | 16 | 0 | 0 |
| Digital Audio Expander Module | 0 | 8 | 16 | 0 | 0 |
| 8 | 16 | 32 | 0 | 0 | |
| Configurations #2 | |||||
| Main Video and Audio Module | 8 | 0 | 0 | 0 | 0 |
| Analog Audio Expander Module | 0 | 0 | 0 | 8 | 8 |
| Analog Audio Expander Module | 0 | 0 | 0 | 8 | 8 |
| 8 | 0 | 0 | 16 | 16 | |
| Configurations #3 | |||||
| Main Video and Audio Module | 8 | 0 | 0 | 0 | 0 |
| Digital Audio Expander Module | 0 | 8 | 16 | 0 | 0 |
| Analog Audio Expander Module | 0 | 0 | 0 | 8 | 8 |
| 8 | 8 | 16 | 8 | 8 | |
The advanced audio plug-in has the following features:
- The maximum number of advanced audio plug-ins supported is two per FS/XD and audio expansion module pair
- If the configuration has an FS or XD module, one audio expansion module and one advanced audio plug-in sub-module, the advanced audio plug-in must be installed on the FS or XD module
- If the configuration has an FS or XD module, two audio expansion modules and two advanced audio plug-in sub-modules, the advanced audio plug-in must be installed on the FS or XD module and the first adjacent audio expansion module
Back Module Connectivity
The SEL-1XD1 and SEL-2XD1 video conversion applications modules offer four choices for back module external connectivity — HD-BNC electrical connections for input and output; dual-SFP optical input with HD-BNC outputs; HD-BNC inputs with two dual-SFP optical outputs; and a dual-SFP optical input and two dual-SFP optical outputs. All four back modules provide AES-3 connections utilizing HD-BNC connectors, and GPI connections utilizing a 20-pin socket/plug connector.
SDI interfaces utilize a Belden-type 1505A, 1694A or 1695A cable (or equivalent) with HD-BNC connectors, and AES-3 interfaces utilize a Belden-type 1855 cable (or equivalent) with HD-BNC connectors. Adaptor cables and an insertion/extraction tool is provided for these types of HD-BNC connections. For optical input and output connectivity, dual-SFP receivers and transmitters can be provided with the appropriate back module.
Images/Diagrams
Block Diagrams - Click on the image for high res.
Electrical to Electrical (EES)
Electrical to Optical (EOS)
Optical to Electrical (OES)
Optical to Optical (OOS)
Back Modules
 |  |  |  |
Specifications
Specifications and designs are subject to change without notice.
| SDI VIDEO INPUTS | |
| 3 Gb/s HD-SDI Inputs | |
| Number of Inputs | 2 |
| Standard | SMPTE 424M (2.97, 2.97/1.001 Gb/s), SMPTE 425 Level A, Level B-DL (YCrCb, 4:2:2, 10-bit with 16 channels of embedded audio) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >15dB, typical, from 5 to 1485 MHz
>10dB, typical, from 1485 to 2970 MHz |
| Equalization | Adaptive cable equalization for up to 360 ft (110 m), typical, of Belden 1694A coaxial cable |
| 1.5 Gb/s HD-SDI Inputs | |
| Number of Inputs | 2 |
| Standard | SMPTE 292M (1.485, 1.485/1.001 Gb/s) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >15 dB, typical, from 5 to 1485 MHz |
| Equalization | Adaptive cable equalization for up to 590 ft (180 m), typical, of Belden 1694A coaxial cable |
| SD-SDI Inputs | |
| Number of Inputs | 2 |
| Standard | SMPTE 259M-C (270 Mb/s, 525/625 component video) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >20 dB, typical, from 5 to 270 MHz |
| Equalization | Adaptive cable equalization for up to 1230 ft (375 m), typical, of Belden 1694A coaxial cable or 902 ft (275 m), typical, of Belden 8281 coaxial cable |
| HD Fiber Video Inputs | |
| Number of Inputs | 2 |
| Standard | SMPTE 292M, Mode B operation |
| Connector | LC |
| Input Wavelength | 1260 to 1620 nm |
| Sensitivity | -22 dBm (typical), -20 dBm maximum |
| 3 Gb/s Fiber Video Inputs | |
| Number of Inputs | 2 |
| Standard | SMPTE 424M |
| Connector | LC |
| Input Wavelength | 1260 to 1620 nm |
| Sensitivity | -20 dBm, typical, 18 dBm maximum |
| Composite Video Input | |
| Standard | NTSC (SMPTE 170M)
PAL-B (ITU 624-2) |
| Connector | HD-BNC |
| Input Level | 1 V pk-pk |
| Impedance | 75 ohms |
| Return Loss | >40 dB, 0.1 to 6 MHz |
| Common Mode Range | 5 V |
| CMRR | 60 dB @ 50/60 Hz, 5 V pk-pk |
| 3 Gb/s HD-SDI Outputs | |
| Number of Outputs | 2 |
| Standard | SMPTE 424M (2.97, 2.97/1.001 Gb/s), SMPTE 425 Level A, Level B-DL (YCrCb, 4:2:2, 10-bit with 16 channels of embedded audio) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >10 db, typical, from 5 to 2970 MHz |
| Signal Level | 800mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall Time | <135 ps (20% to 80%) |
| Overshoot | <10% of amplitude (all outputs terminated) |
| Jitter | Timing jitter: <2UI pk-pk
Alignment jitter: <0.3UI pk-pk |
| 1.5 Gb/s HD-SDI Outputs | |
| Number of Outputs | 2 |
| Standard | SMPTE 292M (1.485, 1.485/1.001 Gb/s) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >15 dB, typical, from 5 to 1485 MHz |
| Signal Level | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall Time | <270 ps (20% to 80%) |
| Overshoot | <10% of amplitude (all outputs terminated) |
| Jitter | Timing jitter: <1 UI pk-pk
Alignment jitter: <0.2 UI pk-pk |
| SD-SDI Outputs | |
| Number of Outputs | 2 |
| Standard | SMPTE 259M-C
(270 Mb/s, 525/625 component video) |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >20 dB, typical, from 5 to 270 MHz |
| Signal Level | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Rise and Fall Time | 400 to 1500 ps (20% to 80%) |
| Overshoot | <10% of amplitude (all outputs terminated) |
| Jitter | Timing jitter: <0.2 UI pk-pk
Alignment jitter: <0.2 UI pk-pk |
| HD Fiber Video Outputs | |
| Number of Outputs | 2 |
| Standard | SMPTE 292M, Mode B operation |
| Connector | LC |
| Output wavelength | 1310 ±30 nm |
| Rise/Fall Time | 60 ps, typical, 100 ps maximum |
| Laser Safety Level | Class 1 |
| 3 Gb/s Fiber Video Outputs | |
| Number of Outputs | 2 |
| Standard | SMPTE 424M, Mode B operation |
| Connector | LC |
| Output Wavelength | 1310 ±30 nm |
| Rise/Fall Time | 105/120 ps, typical, 165/180 ps, maximum |
| Jitter | 110 ps typical, 180 ps maximum |
| Laser Safety Level | Class 1 |
| AUDIO INPUTS | |
| Unbalanced AES Input | |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6.0 MHz |
| Sensitivity | ≥100 mV |
| Input Audio Rate | 32 to 108 kHz |
| AUDIO OUTPUTS | |
| Unbalanced AES Output | |
| Standard | AES-3, SMPTE 276M |
| Type | Unbalanced, AC coupled |
| Connector | HD-BNC |
| Impedance | 75 ohms |
| Return Loss | >25 dB, 0.1 to 6 MHz |
| Signal Amplitude | 1 V pk-pk @10% into 75 ohms load |
| Audio Rate | 48 kHz |
| Rise/Fall Time | 30 to 44 ns (10% to 90%) |
| Bits | 24, 20 or 16 |
| Channel Status/User Bit | Maintained, but professional mode, 48 kHz |
| COMMUNICATIONS | |
| GPI | |
| Connector | Multi-pin |
| Number of Inputs | 4 |
| Number of Outputs | 4 |
| RS-232/422 | |
| Standard | Electrical specification EIA-232C |
| Connector | DB9:
232/422 switchable 422 termination can be selected from the menu |
| Power Consumption | 40 W maximum |
Ordering Information
| Dual-/Single-Channel Conversion with Advanced Audio Processing | |
| SEL-2XD1-EES | Dual-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter and full embedded audio processing, includes single back module with HD-BNC connectors for SDI and composite input, SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-1XD1-EES | Single-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter and full embedded audio processing, includes single back module with HD-BNC connectors for SDI and composite input, SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-2XD1-EOS | Dual-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter, 3D capability and full embedded audio processing, includes single back module with HD-BNC connectors for SDI and composite input, dual-SFP optical output (order two SFP dual-output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-1XD1-EOS | Single-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter and full embedded audio processing, includes single back module with HD-BNC connectors for SDI and composite input, dual-SFP optical output (order one or two SFP dual-output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-2XD1-OES | Dual-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter, 3D capability and full embedded audio processing, includes single back module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-1XD1-OES | Single-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter and full embedded audio processing, includes single back module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-2XD1-OOS | Dual-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter, 3D capability and full embedded audio processing, includes single back module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, dual-SFP optical output (order two SFP dual-output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-1XD1-OOS | Single-channel video conversion front module with up/down/cross, frame rate and aspect ratio conversion, logo generator/inserter and full embedded audio processing, includes single back module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, dual SFP optical output (order one or two SFP dual-output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| Dual-/Single-Channel Conversion with Advanced Audio Processing — Options | |
| SELOPT-SK-XD | Software-keyed option for single-channel to dual-channel field upgrade of video conversion module |
| SELOPT-SK-SC | Software-keyed option for adding linear frame rate conversion (single channel) to the single- or dual-channel video conversion module |
| Dual-/Single-Channel Conversion with Advanced Audio Processing, Front Module Only | |
| SEL-FM-2XD1 | Dual-channel video conversion, front module only |
| SEL-FM-1XD1 | Single-channel video conversion, front module only |
| Dual-/Single-Channel Conversion with Advanced Audio Processing — Back Modules | |
| SEL-BM-FSXD-EES | Single back module for FS/XD front module with HD-BNC connectors for SDI and composite input, SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-BM-FSXD-EOS | Single back module for FS/XD front module with HD-BNC connectors for SDI and composite input, dual SFP optical output (order one or two SFP dual output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-BM-FSXD-OES | Single back module for FS/XD front module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SEL-BM-FSXD-OOS | Single back module for FS/XD front module with SFP optical input (order one SFP dual-input option separately) for SDI input, HD-BNC connectors for SDI outputs, dual SFP optical output (order one or two SFP dual output option separately), 8 AES (unbalanced) input/output ports and socket/plug for 4 GPI inputs, 4 GPI outputs and 2 serial data connections |
| SFP Dual-Output Options | |
| OP+SFP+TT+13+13 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic products; 1310 nm and 1310 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+27+29 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1270 nm and 1290 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+31+33 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1310 nm and 1330 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+35+37 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1350 nm and 1370 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+43+45 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1430 nm and 1450 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+47+49 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1470 nm and 1490 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+51+53 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1510 nm and 1530 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+55+57 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1550 nm and 1570 nm wavelength dual transmitter with pathological support for baseband video |
| OP+SFP+TT+59+61 | Small Form Factor Pluggable (SFP) for Harris Fiber Optic Products; 1590 nm and 1610 nm wavelength dual transmitter with pathological support for baseband video |
| SFP Dual-Input Option | |
| OP+SFP+RR | Small Form Factor Pluggable (SFP) for Harris Fiber Optic products; Dual PIN receiver with pathological support for baseband video |
| Advanced Audio Processing Option Plug-in for FS/XD | |
| SELOPT-ADVAUD | Advanced audio processing sub-module for FS/XD (requires software key license option) |
| Advanced Audio Processing Software Key License Options for FS/XD | |
| SELOPT-SK-DEE | 1 Software key license for 1 Dolby® E encoder for FS/XD |
| SELOPT-SK-DED | 1 Software key license for 1 Dolby® E decoder for FS/XD |
| SELOPT-SK-DDE | 1 Software key license for 1 Dolby® Digital Pro encoder (5.1 or 2.0) for FS/XD |
| SELOPT-SK-DDD | 1 Software key license for 1 Dolby® Digital Pro decoder (5.1 or 2.0) for FS/XD |
| SELOPT-SK-DTS | 1 Software key license for DTS Neural Technologies option (3 software key licenses required for DTS Neural Surround™ UpMix or DownMix or 5.1 DTS Neural Loudness Control, 4 software key licenses required for DTS Neural Surround MultiMerge, 1 software key license required for 2.0 DTS Neural Loudness Control) |
| Cables, Adaptors, Connector/Tools | |
| SELOPTCAB-HD-BNC-V | HD-BNC plug to BNC jack adaptor cable for video (12 in.) |
| SELOPTCAB-HD-BNC-A | HD-BNC plug to BNC jack adaptor cable for audio (12 in.) |
| SELOPT-TOOL-CABLE | HD-BNC cable insertion and extraction tool |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
