Adobe PDF Icon Print Friendly Version

HDX6803+D

Auto-Sensing 3G/HD/SD Audio De-Embedder with up to 8 AES Outputs

The HDX6803+D 3G/HD/SD audio de-embedder module for the 6800+™ modular core processing platform has up to eight AES outputs and a video processing amplifier. It allows control over the video while functioning as a de-embedded audio processor for hot-switching de-embedded audio. This new module provides full audio delay, audio processing and the ability to de-embed metadata to external sources. The HDX6803+D is ideal for any broadcast operation where the de-embedding of audio from HD or SD video signals is required, or where HD or SD video and (embedded and/or discrete) audio signals are processed.

The OP+HDX+R+D version includes the fiber sub-module, which will allow the addition of an optical receiver to complement the electrical inputs.

Features

  • Inputs:
    • One video serial digital input
    • DARS input (unbalanced, balanced compatible with external baluns)
    • Fiber receiver (OP+HDX+R+D version)
  • Outputs:
    • Four serial video digital outputs
    • Eight AES outputs (unbalanced, balanced compatible with external baluns) 
      Four AES standard; eight with HDX68OPT-AES8 license option
    • RS-232/422 serial port metadata output
  • Operates video standards:
    • 525 and 625 (SMPTE 259M)
    • 1080i/p
    • 720p (SMPTE 274M/296M)
    • 3 Gb/s (SMPTE 424M) upgradeable
  • Auto-detect or user-forced input video standard
  • 10-bit video processing
  • Digital equalization (supports Belden 8281/1694A and newer, thin coaxial cables like Alcatel SD02)
  • Passes all HANC samples
  • Passes VANC with user-selectable option for VBI/ANC line-by-line video deleting
  • Up to eight frames of HD and 50 frames of SD video delay
  • Loss of video modes:
    • Pass
    • Black
    • Freeze
  • Video processing amplifier with controls for:
    • Luminance gain
    • Luminance offset
    • Chrominance gain
    • Chrominance offset
    • White clip
    • Black clip
    • Hue adjustment
  • Ability to de-embed metadata
  • Dolby® header adjustment
  • Support for fiber receiver (OP+ HDX+R versions) option via sub module on main module
  • Basic audio limiting capability:
    • User-selectable threshold for soft compression limiting
    • Adjustable compression slope
    • Adjustable attack time/rate
    • Adjustable delay time/rate
    • Noise gate level and time
  • Video and audio test generator
  • AES audio routing/advanced processing
  • Internal audio processing amplifier with gain, swap, invert, delay, mix (sum) of de-embedded audio channels
  • Bypassable sample rate conversion for external and embedded audio
  • Data mode for passing compressed audio – apt-X®, Dolby® E, AC-3
  • 16-, 20- or 24-bit audio processing
  • C, U and V bit transparency
  • Shadowed/restored parameter settings when switching video standards
  • Card-edge control
  • Ethernet remote control and monitoring
  • V-fade of the output audio on audio source change

Product Details

Each HDX6803+D package includes a module-specific breakout cable that expands the number of available connections beyond what would fit on a standard two-slot back connector. The breakout cable includes an RS-232/422 serial connector to em-bed or de-embed Dolby® metadata. The HDX6803+D can be controlled manually via card-edge controls with OSD video display or remotely using CCS Navigator™, HTTP web server or third-party SNMP-based control applications. In addition, the module is Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in a FR6822+QXFE frame.

Images/Diagrams

Block Diagram

HDX6803+BD.jpg

Back Module

HDX6803+BM.jpg

Specifications

Specifications and designs are subject to change without notice.

Serial Video Input
Number1
Standards1080p (SMPTE 424M) - 3 Gb/s HD
1080i/p (SMPTE 274M);
720p (SMPTE 296M) – HD-SDI
SMPTE 259M-C, 270 Mb/s, 525/625 component: SD-SDI
ConnectorBNC per IEC 169-8
Impedance75 ohms
Frame Rate1080i/p: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are future software upgradeable)
720p: 50, 59.94, 60 Hz
Return Loss>15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz
Equalization3 Gb/s-adaptive cable equalization for up to 164 ft (50 m), typical of Belden 1694A coaxial cable
HD-adaptive cable equalization for up to 492 ft (150 m),  typical of Belden 1694A coaxial cable
SD-adaptive cable equalization for up to 984 ft (300 m), typical of Belden 8281 coaxial cable
 
Serial Video Output
Number4
Standards1080p (SMPTE 424M) - 3 Gb/s HD
1080i/p (SMPTE 274M);
720p (SMPTE 296M) – HD-SDI
SMPTE 259M-C, 270 Mb/s, 525/625 component – SD-SDI
Frame Rate1080i: 25, 29.97, 30, 59.94 Hz
1080p: 23.98 (p/psf), 24 (p/psf), 25, 29.97, 30, 50, 59.94, 60 Hz (3 Gb/s rates are software upgradeable)
720p: 50, 59.94, 60 Hz 525, 625
ConnectorBNC per IEC 169-8
Impedance75 ohms
Return Loss>15 dB from 5 to 1485 MHz; >12 dB from 1485 to 2970 MHz
D.C. Offset0 V ±0.5 V
Signal Level800 mV 10%
Rise and Fall Time<135 ps - 3 Gb/s
<270 ps - HD-SDI
0.4 to 1.5 ns - SD-SDI
Overshoot/Undershoot<10%
Jitter3 Gb/s: <2 UI pk-pk of timing jitter (>10 Hz); <0.3 UI pk-pk of alignment jitter (>100 kHz)
HD: <1 UI pk-pk of timing jitter (>10 Hz); <0.2 UI pk-pk of alignment jitter for (>100 kHz)
SD: <0.2 UI pk-pk (>10 Hz);
DelayUp to 8 frames less 2 lines for 3G/HD; 50 frames for SD
 
Unbalanced AES/DARS Input
ConnectorBNC (IEC 169-8)
Impedance75 ohms
Return Loss>25 dB, 0.1 to 6.0 MHz
Sensitivity<100 mV
Input Audio Rate32 to 108 kHz
 
Balanced AES/DARS Input (with External Baluns)
ConnectorXLR with external baluns
Sensitivity<200 mV
Impedance110 ohms ±20% (0.1 to 6 MHz)
Maximum Input Signal10 V (pk-pk)
Common Mode Rejection0 to 7 V (0 to 20 kHz)
Input Audio Rate32 to 108 kHz
 
AES Unbalanced Output
StandardAES3, SMPTE 276M
TypeUnbalanced, AC coupled
ConnectorBNC (IEC 169-8)
Impedance75 ohms
Return Loss>25 dB, 0.1 to 6 MHz
>30 dB, 0.1 to 6 MHz
Signal Amplitude1 V pk-pk ±10% into 75 ohms load
Audio Rate48 kHz
Rise and Fall Time30 to 44 ns (10 to 90%)
Bits24, 20 or 16
 
AES Balanced Output (with External Baluns)
TypeBalanced, transformer coupled
ConnectorXLR with external baluns
Impedance110 ohms ±20% (0.1 to 6 MHz)
Signal Amplitude2 to 7 V pk-pk into 110 ohms load
Audio Rate48 kHz
Jitter±20 ns
Rise and Fall Time5 to 30 ns (10% to 90%)
Bits24, 20 or 16
 
Fiber Optic Input (Receiver)
Number of Inputs1
Wavelength1260 to 1620 nm
ConnectorSC/PC per IEC 61754-4-1
Overload Input Power0 dBm PIN
Input Sensitivity-20 dBm PIN
 
RS-232/RS-422 (Metadata I/O)
StandardElectrical specification EIA-232C
ConnectorDB-9 232/422 switchable
 
Power and Temperature
Power Consumption12 W maximum
Operating Temperature41° to 113° F (5° to 45° C)

Ordering Information

HDX6803+DAuto-sensing HD/SD de-embedder with 4 AES outputs, 3 Gb/s-capable (with appropriate software key), includes double-slot back module and breakout cable, Q-SEE-compliant
 
HDX68OPT-AES8Optional software key upgrade for HDX6803+D to provide 8 discrete AES outputs
 
HDX68OPT-3GOptional software key upgrade for HDX6803+D to provide 3 Gb/s HD capability
 
OP+HDX+R+DAuto-sensing HD/SD de-embedder with 4 AES outputs, 3 Gb/s-capable (with appropriate software key), includes double-slot back module and breakout cable, Q-SEE-compliant with fiber optic receiver
 
6800+OPT+16CAPMBreakout cable with coaxial connectors for unbalanced AES I/O (NOTE: 1 cable provided with each HDX6803+ or OP+HDX+R unit ordered)
 
NOTE: One unbalanced audio breakout cable (6800+OPT+16CAPM) is included with each HDX6803+D module purchased and does not need to be separately ordered/purchased. Additional/replacement cables can be ordered using part numbers 6800+OPT+16CAPM.
 
Connector Options
OP+OPT+STOPTO+ -ST connector option for OPTO+ fiber modules
OP+OPT+FCOPTO+ -FC connector option for OPTO+ fiber modules
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628