Adobe PDF Icon Print Friendly Version

DAS6801+D

Composite Analog A/V Decoder/Synchronizer/Embedder, Q-SEE™-Compliant

The DAS6801+D module for the 6800+™ core processing platform converts video and audio from analog to digital, synchronizes the audio to the video, and then embeds the synchronized audio (four channels) into the SD-SDI video stream. Integrated processing amps provide full processing of both video and audio signals. Output over fiber is available as a separate hardware option (OP+DAS+xxxD product versions).

The DAS6801+D module can be controlled manually via card-edge controls, or controlled and monitored via the CCS Navigator™ software application, HTTP web browser, NUCLEUS™ hardware control panels or third-party SNMP-based control applications. The module is Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame.

Features

  • 2D video decoder comes standard, upgradeable to 3D (available as a software license-key option)
  • 12-bit, 4x oversampling of input video
  • Video frame synchronization
  • User-adjustable input video processing for black level, gain, hue, and saturation
  • Time-base correction
  • Integrated audio processing (gain, invert, mute, channel swap, channel sum)
  • Accepts composite analog video or SD-SDI inputs, with user-selectable input priority (can be used for simple failover protection of input signal)
  • Relay bypass on SDI input for protection against loss of module power
  • Up to four SDI component digital video outputs
  • Optional single-mode or CWDM fiber output (available as separate hardware option)
  • Four analog audio inputs
  • Two discrete AES audio connections (balanced or unbalanced), independently user-configurable as either inputs or outputs
  • Audio embedding of four channels (two analog pairs, two AES pairs, or one pair of each)
  • Integrated video and audio test signal generators
  • Q-SEE-compliant
  • RoHS-compliant

Images/Diagrams

Block Diagram

DAS6801+BD.jpg

Back Module

DAS6801+BM.jpg

Specifications

Specifications and designs are subject to change without notice.

Serial Digital Video Input
Number of Inputs1
ConnectorBNC (IEC 169-8)
StandardsSMPTE 259M-C, 270 Mb/s, 525/625 component
Impedance75 ohms

Composite Analog Video Input
Number of Inputs1
ConnectorBNC (IEC 169-8)
StandardsNTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M
Impedance75 ohms

Reference Video Input
Number of Inputs1
ConnectorBNC (IEC 169-8) (frame only)
Impedance75 ohms

Analog Audio Input
Number of Inputs4
ConnectorWeidmuller 22-pin
Input Analog Level28 to 12 dBu (in 1 dB increment)

AES Unbalanced Input
Number of Inputs2 (shared)
ConnectorBNC (IEC 169-8)
StandardsAES3, SMPTE 276M
Impedance75 ohms
Input Audio RatePCM input: 32 to 108 kHz
Bits16, 20 or 24

AES Balanced Input
Number of Inputs2 (shared)
ConnectorWeidmuller 22-pin
Impedance110 ohms ±20% (0.1 to 6 MHz)
Input Audio RatePCM input: 32 to 108 kHz
Bits16, 20 or 24

Serial Digital Video Output
Number of OutputsUp to 4 (some connections shared)
StandardSMPTE 259M-C, 270 Mb/s, 525/625 component
ConnectorBNC (IEC 169-8)
Impedance75 ohms

Fiber Optic Video Output (OP+DAS+ version only)
Number of Outputs1
Output ConnectorSC
Wavelength1310 nm and CWDM
Output Power-7 dBm ±1 dBm (1310 nm);
0 dBm ±1 dBm (CWDM)

AES Unbalanced Output
Number of Outputs2 (shared)
ConnectorBNC (IEC 169-8)
Impedance75 ohms

AES Balanced Output
Number of Outputs2 (shared)
ConnectorWeidmuller 22-pin
Impedance110 ohms ±20% (0.1 to 6 MHz)

Power Consumption12 W maximum

Ordering Information

DAS6801+DComposite video and analog audio decoder/synchronizer/embedder, with dual-slot back module, for use with FR6822+ series frames, Q-SEE-compliant

DAS68OPT+3DOptional high-quality 3D decoder option for DAS6801+D (available as software license key)
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628