MXA6800+A4D

4-Channel Analog Audio Multiplexer

The MXA6800+A4D analog audio multiplexer embeds four analog audio inputs into one audio group of an SDI stream.

MXA6800+A4 modules can be controlled at the card edge, or controlled and monitored via CCS Navigator™ software applications, HTTP Web browser (with QXFE-series frames only), NUCLEUS™ hardware control panels, or via third-party control applications using SNMP.

Features

SDI input with auto-detect and input status feedback
Black video generator
Four analog inputs
Three SDI outputs with embedded audio
24-bit audio processing with adjustable fade rate, gain, invert and mute
Adjustable audio delay up to approximately 1.3 seconds
20/24 bit audio embedding
Adjustable embedding group and mode
Supports card-edge and remote control of module (via CCS, web browser and third-party SNMP-based control systems)

Images/Diagrams

Block Diagram

MXA6800+A4-BD.jpg

Back Module

MXA6800+A4-BM.jpg

Specifications

Specifications and designs are subject to change without notice.

SDI Input
Standards	SMPTE 259 M-C, 270 Mb/s, 525/625 component
Quantization	10-bit
Connector	BNC (IEC 169-8)
Impedance	75 ohms
Return Loss	>18 dB to 270 MHz

SDI Output
Standards	SMPTE 259 M-C, 270 Mb/s, 525/625 component
Quantization	10-bit
Connector	3x BNC (IEC 169-8)
Impedance	75 ohms
Return Loss	>18 dB to 270 MHz
Signal level	800 mV ±10%
DC Offset	0 V ±0.5 V
Rise and Fall Time	400 to 1500 ps (20 to 80% amplitude)
Overshoot	<10% of amplitude
Jitter	<0.2 UI (740 ps) pk-pk

Analog Audio Inputs
Number	4
Connector	3-pin connector (male)
Analog Input Level	28 to 16 dBu
Impedance	600 ohms/100 k ohms, AC coupled
CMRR	>80 dB @ 60 Hz
THD	>100 dB @ 27 dBu
Noise Floor	>100 dB

Ordering Information

MXA6800+A4D

4-channel analog audio multiplexer, with double-slot rear connector, for FR6802+ series frames

Sales Contacts

North America +1 800 231 9673
Caribbean and Latin America +1 786 437 1960

Europe and Africa +44 118 964 8200
Middle East and South Asia +971 4 433 8250

Asia, Pacific Rim +852 2776 0628