Designed for use with the 6800+™ modular core processing platform, the DA-ASI6802+D is a 1x8 serial video distribution amplifier (DA) that meets the strictest requirements of SMPTE 259ABC and DVB-ASI, using transformers on all outputs for accurate non-inverting polarity. Because of its excellent signal transition performance, it is an ideal DA for ASI-compliant distribution. You can set up, control, and monitor the DA-ASI6802+D either locally via a card-edge jumper or remotely on a PC. For remote control, you can use either a serial RS-232 or optional 6800+ETH Ethernet connection.


Block Diagram

Back Module

Specifications and designs are subject to change without notice.
| Inputs | |
| Number of Inputs | 1 |
| Input Connector | BNC per IEC 169-8 |
| Signal Type | ASI, SDI |
| Impedance | 75 ohms |
| Maximum Input Level | ≥880 mV |
| Return Loss | Better than 18 dB (5 to 270 MHz) |
| Cable Equalization | 0 to 300 m Belden 1694A or equivalent |
| Outputs | |
| Number of Outputs | 1 |
| Output Connector | 75 ohms BNC per IEC 169-8 |
| Output Coupling | Transformer |
| Signal Type | ASI, SDI |
| Impedance | 75 ohms |
| Return Loss | Better than 18 dB (5 to 270 MHz) |
| Output Amplitude | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Performance | |
| Jitter | <0.2 UI @ data rate tested |
| DC Offset | 0 V ±0.5 V |
| Rise/Fall Time | 400 ps to 850 ps |
| Overshot | <10% |
| Propagation Delay | 4 ns |
| Power | <3.5 W |
| Temperature | |
| Operating | 32° to 122° F (0° to 50° C) |
| Performance | 41° to 104° F (5° to 40° C) |
| DA-ASI6802+D | 1x8 DA, SD/ASI with reclocking and transformers, 2 slots |