ENS6801+D
SDI Video Encoder/Synchronizer, Q-SEE™-Compliant
The ENS6801+D is a high-precision, 12-bit digital encoder with synchronizer, supporting NTSC, PAL-B and PAL-M standards. Automatic standard selection is available for 525-line NTSC and PAL-M. The ENS6801+D module also provides frame synchronization and cross-color reduction.
Part of the 6800+™ core processing platform, the ENS6801+D module can be controlled manually via card-edge controls, or controlled and monitored via the CCS Navigator™ software application, HTTP web browser, NUCLEUS™ hardware control panels or third-party SNMP-based control applications. The module is Q-SEE™-compliant, allowing for direct thumbnail monitoring when installed in an Ethernet-equipped 6800+ frame.
Features
- Line synchronization within a three-line window
- Frame sync or delay modes
- Encodes 4:2:2 digital video into a composite analog signal
- 12-bit digital internal processing, output over-sampled at 54 MHz
- Four composite outputs
- Two SDI reclocked outputs: one dedicated, one jumper-selectable for audio tracking signal for compatible audio synchronizers (ADS6800+ and MSA6800+ series modules)
- Bypassable cross-color reduction with one-line delay
- Automatic selection between NTSC, PAL-M and PAL-B standards, with settings shadowed and restored
- Genlock input on module, or frame genlock can be used for reference
- Black, pass or freeze selectable when input signal is lost
- Jitter removal
- EDH detection
- Vertical blanking field/line/mode control: Line 10 to 21 (NTSC/PAL-M), lines 6 to 23 (PAL-B)
- Adjustable level controls (luminance, chrominance, black)
- Adjustment for ±180° chrominance phase
- SCH offset (0/180 for NTSC, 0/90/180/270 for PAL)
- Adjustment for ±45° fine phase
- Test signal generator (color bars, modulated ramp, multiburst, pulse/bars)
- Pedestal on/off selection (with starting line selection)
- Supports card-edge and remote control of module (via CCS Navigator, web browser and third-party SNMP-based control applications)
- Q-SEE-compliant
Images/Diagrams
Block Diagram
Back Module
Specifications
Specifications and designs are subject to change without notice.
| SDI Input | |
| Standards | SMPTE 259M-C, 270 Mb/s, 525/625 component |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >18 dB to clock frequency |
| Signal Level | 800 mV ±10% |
| CMRR | 30 V pk-pk, up to 60 Hz |
| Equalization | Automatic up to: >23 dB, 259M-C, typical |
| SDI Outputs | |
| Standards | SMPTE 259M-C, 270 Mb/s, 525/625 component |
| Connector | BNC per IEC 169-8 |
| Impedance | 75 ohms |
| Return Loss | >18 dB to clock frequency |
| Signal Level | 800 mV ±10% |
| DC Offset | 0 V ±0.5 V |
| Drive Capability | Up to 820 ft (250 m), typical, for Belden 8281 |
| Composite Analog Outputs | |
| Standards | NTSC, PAL-B, PAL-M |
| Impedance | 75 ohms |
| Return Loss | >40 dB to 5.75 MHz |
| Quantizing | 12-bits |
| Frequency Response | ±0.15 dB to 5.5 MHz |
| Differential Gain | <1% (typically <0.5%) |
| Differential Phase | <1° (typically <0.5°) |
| DC Offset | ±5 mV |
| Chroma/Luma Delay | <1.5 ns |
| Chroma/Luma Gain | ±1.5% |
| Luma Non-linearity | <0.2% |
| Signal to Noise | >60 dB rms with bandwidth 10 kHz to full |
| Vertical Blanking | 10 to 21 lines for NTSC for both fields (field 2: 272 to 283)
6 to 23 lines for PAL for both fields (field 2: 318 to 335) |
| Reference Input | |
| Level | 1 V pk-pk |
| Signal Type | Analog composite NTSC/PAL-B |
| Connector | BNC |
| Impedance | 75 ohms |
| Return Loss | >40 dB to 6 MHz |
| Power Consumption | 7.5 W |
Ordering Information
| ENS6801+D | SDI to NTSC/PAL encoder/synchronizer, module and double-slot rear connector for use in FR6802+ series frames, Q-SEE-compliant |
Sales Contacts
- North America +1 800 231 9673
- Caribbean and Latin America +1 786 437 1960
- Europe and Africa +44 118 964 8200
- Middle East and South Asia +971 4 433 8250
- Asia, Pacific Rim +852 2776 0628
