DPA-90

Serial Digital Processing Amplifier

The DPA-90 Serial Digital Processing Amplifier provides the controls that are familiar in the analog world while working in a pure component 601 serial digital format. The Proc Amp provides control, via dedicated knobs, of six video parameters including: video gain, luminance gain, chroma gain, hue, pedestal (black level) and Y/C delay. Front panel LEDs provide constant system status monitoring. The system can be controlled either with front panel controls or with either of two optional, separate remote controls that operate over an RS-422 interface.

Features

Automatic detection of 525/60 or 625/50 digital formats
Full resolution, 10-bit processing
Full EDH support and alarms
Passive Bypass in case of power loss
Two optional remote control panels (up to 300 meters from DPA-90)
Standards available: 525 and 625

Product Details

RCU-100M Expanded Function Remote Control

Permits multiple (up to 32) DPA-90 and/or DPA-100 units to be controlled from a single point
Limits may be set independently for 525 and 625 signal inputs
Display includes numeric readouts of processing
Desktop or rackmount (half rack wide, 3RU tall - fits in standard scope mount)

Images/Diagrams

Block Diagram

Specifications

Specifications and designs are subject to change without notice.

Video
Input	1 non-looping serial digital, per SMPTE 259M-C
Input Connector	BNC female
Input Impedance	75 ohms
Input Return Loss	<-18 dB, 5 to 270 MHz
Data Format	4:2:2 component, 525/60 or 625/50 auto-detected
Input Level	800 mV pk-pk nominal, w/equalization for up to 200 m of 8281
Outputs	Four serial digital per SMPTE 259M-C
Output Connectors	BNC female
Output Impedance	75 ohms
Output Return Loss	<-18 dB, 5 to 270 MHz, processing <-15 dB, 5 to 270 MHz, passive
Output Level	800 mV pk-pk ±10% into 75½
Rise and Fall Time	0.4 ns minimum, 1.5 ns maximum
Passive Bypass	The primary output is passively connected to input with power loss
Throughput Delay	3.85 µs nominal

Adjustments
Video Gain	0 to 150%
Luminance Gain	0 to 150%
Color Gain	0 to 150%
Hue Shift	±360°
Black Level	±15% of full scale from input levels
Y/C Delay	±1 µs

Control
RS-422 interface on back panel
Connector	9-pin D-sub, female

Power Requirements
Input	90 to 264 VAC, 50/60 Hz
Consumption	43 VA

Mechanical
Dimensions (H x W x D)	1.6 x 8.3 x 13 in. (4.1 x 21.1 x 33 cm)
Weight	3.8 lbs(1.7 kg)

Environmental
Operating Temperature	0° to 50° C
Storage Temperature	–40° to 65° C
Humidity	90% maximum (non-condensing)

Standard Accessories
Operation and service manual
Power cord

Ordering Information

Options
RCU-90	Remote control (not shown)
RCU-100M	Expanded function remote control
DRT-1	Rackmount tray for mounting one or two DPA--90s or DPA-100s
DRT-2	Rackmount tray for mounting one or two RCU-90s or RCU-100s
BLK-3	Blank filler panel for either side of DRT-1 or DRT-2

Not for sale in the EU

Sales Contacts

North America +1 800 231 9673
Caribbean and Latin America +1 786 437 1960

Europe, Middle East & Africa +44 (0) 118 964 8200
Asia, Pacific Rim +852 2776 0628