GPS-3903

GPS Receiver and Antenna Systems

The NEO® GPS-3903 and standalone GPS receiver/antenna allow the CSD-3902 master clock driver, the VSG-410 signal generator and MTG-3901 master timing generator to provide outputs with great accuracy by using the most accurate source of time used in the public domain — a system of 24 satellites that provides complete coverage in any part of the world with information on time and position. This makes the CSD-3901/2 and MTG-3901 totally independent from telephone or radio receiver standards.

Features

  • Compatible with NEO CSD-3902 clock system driver and MTG-3901 master timing generator modules
  • Separate antenna and receiver for mounting flexibility
  • Used to remotely locking multiple reference systems

Images/Diagrams

Block Diagram

GPS-3903-BD.jpg

Specifications

Specifications and designs are subject to change without notice.

GPS RECEIVER

 
Environmental
Operating Temperature-40° to 185° F (-40° to 85° C)
Storage Temperature-67° to 212° F (-55° to 100° C)
Vibration0.008 g2/Hz, 5 to 20 Hz
0.05 g2/Hz, 20 to 100 Hz
3 bD/octave, 100 to 900 Hz
Operating Humidity5% to 95% R.H., non-condensing, @ 140° F (60° C)
Altitude-1,312 to 59,005 ft (-400 to 18,000 m)

 
Technical 
Prime Power9 to 32 VDC input
Power Consumption (nominal)25 mA, 30 mW, at 12 V, 77° F (25° C), with antenna
Back-up Power3 to 12 VDC (20 µa @ 3.3 V, 77° F (25° C))
Serial Ports2 RS-232
I/O Protocol OptionsTrimble standard interface protocol (TSIP) @ 9600 baud, 8-Odd-1
Trimble ASCII interface protocol (TAIP)) @ 4800 baud, 8-None-1
NMEA 0183 v3.0 @ 4800 baud, 8-None-1
RTCM SC-104 @ 4800 baud, 8-None-1
NMEA MessagesStandard: GGA and VTG
Optional: User-selectable combination of; GGA, GLL, VTG, ZDA, GSV, GSA and RMC; user can store configuration in non-volatile memory

 
Performance
GeneralL1 frequency, C/A code (SPS), 12-channel continuous tracking receiver
Update Rate1 Hz (TSIP, NMEA, or TAIP)
AccuracyPosition - Horizontal: <5 m (50%), <8 m (90%)
Position - Altitude: <10 m (50%), <16 m (90%)
Velocity: 0.06 m/sec
1 PPS (static)±50 ns
DGPD AccuracyPosition: 2 m CEP (50%)
Velocity: 0.05 m/sec (1 sigma)
Time: ±500 ns (nominal)
Acquistion Cold Start<50 sec (50%) <84 sec 90%
Warm Start<38 sec (50%) <42 sec 90%
Hot Start<10 sec (50%) <13 sec 90%

Cold start requires no initialization. Warm start implies last position, time and almanac are saved by back-up power. Hot start implies ephemeris also saved.

Re-acquistion after signal loss<2 sec (90%)

 
Dynamics: 
Acceleration4g (39.2 m/sec2)
Motional Jerk20 m/sec2
Operational LimitsAltitude <59,005 ft (18,000 m) or velocity <515 m/sec 
Either limit may be executed but not both

 
Physical Characteristics
Dimensions 
Metal Enclosure (D x W x H)4.03 x 4.97 x 1.1 in. (102 x 127 x 28 mm)
Mounting Flange (D x W x H)4.03 x 6.81 x 1.1 in. (102 x 173 x 2 mm)
Weight0.57 lbs (0.26 kg) (board + enclosure + flange)

 
Connectors 
AntennaMCX
Serial Data2 DB-9
Power3-pin Conxall

 
GPS ANTENNA 

 
Environmental
Operating Temperature-40° to 185° F (-40° to 85° C)
Storage Temperature-40° to 212° F (-40° to 100° C)
Vibration10 to 200 Hz log sweep
3 g (sweep time 30 minutes), 3 axes
Shock50 g vertical, 30 g all axes
HumidityMil-STD-810E
Corrosion5% salt spray
WaterproofImmersion to  3 ft (1 m)

 
Physical Characteristics
Dimensions (DxH)3.05 x 2.61 in. (77.5 x 66.2 mm)
Weight6.0 oz (170 g)
EnclosureOff-white plastic
ConnectorF-type or TNC
Mounting1 in. -14 thread or 3/4 in. pipe thread

 
Technical Performance
Prime Power5 VDC (±10%)
Power Consumption30 mA maximum
Output Impedance50 ohms
Frequency1575.42 MHz ±1.023 MHz
PolarizationRight-hand circular polarization (RHCP)
VSWR2, maximum
Axial Ratio90°: 4.0 dB, maximum; 10°: 6 dB maximum
Gain35 dB ±3 dB
Noise3.3 dB, maximum  (77° F (25°) ±41° F (5° C))
Pass-Band Width50 MHz
Out of Band Rejectionfo = 1575.42 MHz
fo ±20 MHz: 7 dB minimum
fo ±30 MHz: 12 dB minimum
fo ±50 MHz: 20 dB minimum
fo ±100 MHz: 30 dB minimum
Azimuth Coverage360° (omni-directional)
Elevation Coverage0° to 90° elevation (hemispherical)

Ordering Information

GPS-3903GPS receiver and antenna, 110 to 240 VAC operation, includes GPS receiver, antenna, AC power supply, RG-59 antenna cable 75 ft (23 m) and RS-232 adapter cables for MTG-3901, CSD-3902

 

OPTIONS

 

GPS-3902-RMRackmount kit, holds up to 2 GPS-3902, GPS-3903 receivers
CAB-CSD-GPS3901Replacement GPS3902 or GPS-3903 adapter cable for CSD-3901/2 (included with GPS-3902/3)
CAB-CSD-GPS39Y2"Y" Adapter cable for connection of 2 CSD-3902/1 to 1 GPS-3902 or GPS-3903
PWRSUPPLY-KITStandalone 100 to 240 VAC replacement DC power adaptor for GPS-3903, GPS-3902, GPS-3901 (included with GPS-3901/2/3)
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628