GPS-3904

GPS Receiver and Antenna Systems

The GPS-3904 and standalone GPS receiver/antenna allow the CSD-3901/CSD-3902 Master Clock Driver , the VSG-410 signal generator and the MTG-3901 Master Timing Generator to provide outputs with great accuracy by using the most accurate source of time used in the public domain. A system of 24 satellites provides complete coverage in any part of the world with information on time and position. This makes the CSD-3901/2 and MTG-3901 totally independent from telephone or radio receiver standards.

Features

  • Compatible with VSG-410 and the NEO® CSD-3902 clock system driver and MTG-3901 master timing generator modules
  • Separate antenna and receiver for mounting flexibility
  • Used to remotely lock multiple reference systems
  • Continuous connection and update
  • Hardware features
  • A single, printed circuit board containing
    • A quality ovenized oscillator
    • A 12-channel GPS receiver
  • Control circuitry
  • Easy calibration for different cable lengths
  • Output
    • 10 MHz reference signal output via BNC connector
    • One PPS output with an over-determined solution synchronized to GPS
    • UTC time

Images/Diagrams

Block Diagram

GPS-3903-BD.jpg

Specifications

Specifications and designs are subject to change without notice.

GPS RECEIVER

 
Environmental
Operating Temperature32° to 140° F (0° to +60° C)
Storage Temperature-40° to 185° F (-40° to +85° C)
Operating Humidity95% non-condensing
Altitude11.2 miles (18 km)  maximum

 
Technical
Prime Power24 VDC
Power Consumption (nominal)15 (cold) to 10 W (steady state)
Serial PortsRS-232
I/O Protocol OptionsTrimble standard interface protocol (TSIP) @ 9600 baud, 8-Odd-1

 
Performance
GeneralL1 frequency, C/A code (SPS), 12-channel continuous tracking receiver
Update Rate1 Hz
1 PPS (static)15 ns (one sigma)
10 MHz1.16 x 10-12 (one day average)
Harmonic Level-40 dBc maximum
Spurious-70 dBc maximum
Phase Noise10 Hz, -120 dBc/Hz
100 Hz, -135 dBc/Hz
1 kHz, -135 dBc/Hz
10 kHz, -145 dBc/Hz
100 kHz, -145 dBc/Hz
Operational LimitsAltitude <11.2 miles (18 km)

 
Physical Characteristics
Dimensions: 
Metal Enclosure (H x W x D)2 x 4 x 5 in. (40 x 102 x 127 mm)
Mounting Flange6 mounting holes for M3 screws. Maximum depth 12 mm
Weight0.628 lbs (0.285 kg)
 
Connectors: 
AntennaBNC
10 MHz OutputBNC
PPS OutputBNC
Serial Data9 pin D-sub
Power2-pin locking push pin type adapter (Molex)

 
GPS ANTENNA 

 
Environmental
Operating Temperature-40° to 185° F (–40° to 85° C)
Storage Temperature-40° to 212° F (–40° to 100° C )
Vibration10 to 200 Hz log sweep
3 g (Sweep time 30 minutes) 3 axes
Shock50 g vertical, 30 g all axes
HumidityMil-STD-810E
Corrosion5% salt spray
WaterproofImmersion to 3.3 ft (1 m)

 
Physical Characteristics
Dimensions (DxH)3.05 x 2.61 in. (77.5 x 66.2 mm)
Weight6 oz (170 g)
EnclosureOff-white plastic
ConnectorTNC
Mounting1 in.-14 thread or ¾ in. pipe thread

 
Technical Performance
Prime Power5 VDC (±10%)
Power Consumption30 mA max.
Output Impedance50 ohms
Frequency1575.42 MHz ±1.023 MHz
PolarizationRight-hand circular polarization (RHCP)
VSWR2.0 maximum
Axial Ratio90°: 4.0 dB maximum; 10°: 6 dB maximum
Gain35 dB ±3 dB
Noise3.3 dB maximum (25° ±5° C)
Pass-Band Width50 MHz
Out of Band Rejectionfo=1575.42 MHz
fo ±20 MHz: 7 dB minimum
fo ±30 MHz: 12 dB minimum
fo ±50 MHz: 20 dB minimum
fo ±100 MHz: 30 dB minimum
Azimuth Coverage360° (omni-directional)
Elevation Coverage0° to 90° elevation (hemispherical)

Ordering Information

GPS-3904GPS receiver and antenna, 110 to 240 VAC operation, includes GPS receiver, antenna, AC power supply, 75 ft (23 m) RG-59 antenna cable

 
Options 
CAB-CSD-GPS3901Adapter cable for RS-232 interface for CSD-3902 (VSG-410)
CAB-CSD-GPS39Y2Y Adapter cable for connection of 2 CSD-3902 (VSG-410) to 1 GPS-3904
Sales Contacts
  • North America +1 800 231 9673
  • Caribbean and Latin America +1 786 437 1960
  • Europe and Africa +44 118 964 8200
  • Middle East and South Asia  +971 4 433 8250
  • Asia, Pacific Rim +852 2776 0628

Data Sheet

GPS-3904